SoundTube – IPD-CM62-BGM


More details

Similar Products

soundtube-rs62ez|soundtube-rs62ez
  • SoundTube

SoundTube – IPD-RS62-EZ

The IPD-RS62-EZ is a 6.5" open-ceiling speaker. The IPD-RS82-EZ is a 6.5" open-ceiling speaker. Dante®-addressable coaxial pendant speaker incorporates one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. Enclosure constructed of injection molded ABS with glasber reinforcement for lasting durability in indoor or outdoor applications. 
    Speakers
FZ-SUB-18-A-frontal
  • FZ

FZ Audio – FZ SUB 18A

Características

  • Subwoofer amplificado de 18"
  • Alto falante bobina de 4" dupla aranha e excursão de 19 mm
  • DSP Interno (Digital Signal Processor) com controle via PC através de rede CAT5
  • Amplificação Digital e fonte chaveada
  • Fly track e flange 35mm para pedestal
  • DSP Interno (Digital Signal Processor) com controle via PC ou MAC através de protocolo TCP-IP
  • Entradas de áudio digital protocolo Dante opcional
  • Baixa Altura
  • Usável até 28 hz
    Speakers
CX115P
  • DMIX

DMIX – CX115P

Speaker model: CX115P

Speaker type: 15”Active coaxial loudspeaker

Unit configuration: LF:15" unit 2.5"(65mm)Voice coil

HF:1.7"(44mm)Voice coil driver

Frequency response: 65Hz-19kHz(-10dB)

Rated power: LF:350W, HF:50W

Sensitivity: LF:98dB, HF:109dB

Sound pressure level: 131dB (peak)

Radiation Angle: 60°×60°

Crossover point: DSP control

Size (mm) : 632×423×392 (W×H×D)

Module amplifier power: HF:150W,LF:500W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante

    Speakers