Product Information
The AKF1600 is an intelligent amplifier with 4 inputs/outputs and a built in high performance DSP.
Similar Products
- Stewart Audio
Stewart Audio – CVA16-1-CV-D
The PoE+ Amplifier Series leverages the higher power 802.3at PoE+ standard (30W port power) to power two amplifier models, the AV8-2-LZ-D (8W x 2 @ 4/8Ω) and the CVA16-1-CV-D (16W x 1 @ 70V/100V).
The PoE+ Amplifier Series leverages the higher power 802.3at PoE+ standard (30W port power) to power two amplifier models, the AV8-2-LZ-D (8W x 2 @ 4/8Ω) and the CVA16-1-CV-D (16W x 1 @ 70V/100V). These compact Dante™ amplifiers are designed to be single cable solutions for smaller zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it. Simply plug the PoE+ CAT 5e/6 cable into the amplifier, wire the speakers and route audio and repeat for the next zone. The plenum rating and compact size, allows this amplifier series to be placed in the air handling space, closets, the rack or any other convenient space. The confluence of readily available and inexpensive CAT 5e/6 cabling, Dante™ networked audio and quick installation, makes this amplifier series an essential problem solver.
- Amplifiers
- BARE
BARE – WD60U
The network audio power amplifier integrates a four-way digital power amplifier module. Signal processing and power amplification are solved on one motherboard, which shortens the signal path and simplifies engineering wiring.
- Built-in 4 x 600W / 8 Ω ( 800W / 4 Ω) digital power amplifier
- Professional PC- side control software is easy to use, Ethernet TCP / IP online management, can manage every device in the system at the same time
- ★ DANTE network audio technology, low latency without interference, without loss of smooth and full sound quality
- Network dual backup, multiple devices can be connected hand in hand.
- ★ Automatic or manual network IP configuration, can be named independently for easy identification in the network
- Automatic protection memory function in case of power failure
| Output Power | Output power 8 ohms: 4x600W Output power 4 ohms: 4x800W Bridge mode 8 ohms: 2x 1600W |
| Power amplifier | Maximum efficiency of 90%, two-channel digital power amplifier |
| Frequency Range | 20Hz-20kHz |
| Signal to noise ratio | 100dB / 95dB |
| Sensitivity | 26dB / 1.4V / 32dB |
| Crosstalk | ＞ 90dB |
| Damping coefficient | ＞ 500 |
| Voltage gain | 40dB |
| Total harmonic distortion | ＜ 0.1% |
| Voltage conversion frequency | ＞ 70 |
| Conversion time | <1.5 |
| Features | Input: 2 DANTE signal inputs |
| Protect power | Single channel: short circuit, DC output, low impedance; equipment: ultra low / high voltage, temperature, overload |
| Operation mode | Stereo, mono, bridged |
| interface | Input: 2 x RJ45 Output: 4 x XLR (up to) |
| Unit delay | <1.5ms |
| sampling | 48k |
| Dimensions (WxHxD) mm | 485x90x320mm |
| Weight (kg) | 8kg |
- Amplifiers
- Aqua Broadcast
Cobalt C-600 Fully Featured FM Transmitter
The COBALT C-600 is a robust 600W FM Broadcast Transmitter, boasting FCC part 73 LPFM and IC certifications. Its exceptional audio quality and clear sound from the Direct to Channel Digital technology with minimal manipulation, maintains audio integrity.
- Amplifiers
- AES67 Enabled