Cart
← Back to Product Catalog

Shure – SCM820 DAN

Mixers

More details

Similar Products

studer-vista-v_600px_0|studer-vista-v_600px_0
  • Studer

Studer – Vista V

The new Studer Vista V console harnesses Quad Star technology from the acclaimed Vista X to deliver a powerful, dependable and flexible broadcast audio mixing solution in a compact form factor. Studer's Vistonics™ interface and FaderGlow™ create a uniquely intuitive and stress-free operator experience, while the Infinity Core provides unprecedented levels of CPU-based processing power, handling the largest productions with ease. The new Studer Vista V console harnesses Quad Star technology from the acclaimed Vista X to deliver a powerful, dependable and flexible broadcast audio mixing solution in a compact form factor. Studer's Vistonics™ interface and FaderGlow™ create a uniquely intuitive and stress-free operator experience, while the Infinity Core provides unprecedented levels of CPU-based processing power, handling the largest productions with ease.
  • 32-, 42- or 52-fader console with optional built-in meter bridge.
  • Harnesses Vista X Quad Star technology in a more compact form factor, for no single point of failure redundancy.
  • Fully surround-capable with versatile panning and monitoring functionality.
  • Sophisticated built-in Dynamic Automation system with DAW remote control.
  • High-quality motorised faders.
  • VistaMix – Studer's acclaimed automated microphone mixing algorithm, based on gain sharing. Runs directly on the Infinity Core with no external hardware required.
  • Infinity Core with 12 high-capacity A-Link ports (1536 channels/port) for D23m I/O integration or direct connection into routing systems including Riedel, Evertz, Artel, etc.
  • Easy integration into popular AoIP broadcast networks including Dante, Livewire, AES67, etc.
  • BSS DPR-901 Dynamic EQ Plug-In, assignable to any channel as desired and running directly on the Infinity Core.
  • Up to 6 Lexicon PCM96 Surround high quality reverb processors can be connected with their parameters stored in the mixer's snap shots and accessible directly from the Vistonics Interface.
  • Connecting up to 4 Soundcraft Realtime Racks gives the user access to Universal Audio's huge UAD plug-in library. Parameters are stored and managed directly in the mixer's CUE-List automation.
  • Ember and Pro-Bel protocol support for use with broadcast/newsroom automation systems.
    Mixers
  • Dante Ch: 64x64
  • AES67 Enabled
See the product
stacks-image-bcc6051-1200x112-1
  • Nixer

Nixer – RL128

A 1U 19inch rack mounted AoIP monitoring and mixing unit.

4 models are available the RL64, RL128, RL192 and RL256 and each unit can be configured at time of purchase to be Dante or Ravenna

RL Series units allows two modes of operation a mixing mode which can mix up to 256 channels at 48kHz (128 channels at 96kHz) plus microphone input (via headphone connector) and AES input to create a 259 into 2 mixer. Alternatively, it can be set into a simple Listen mode where touching a channel instantly routes to the LR output and cancels any previous selection.

The outputs of the LR bus are presented to the user via the inbuilt 4mm x 9mm full range speakers or via the 3.5mm headphone jack. The speakers are automatically muted when a headphone jack is inserted. Simultaneous outputs are also available in the form of the stereo balanced line outputs and AES output accessed via XLR connectors on the rear of the RL Series Unit. The mix output is also routed to the AoIP output.

The RL Series units are operated and controlled via the large letterbox 6.6” diagonal (168mm) 1440 x 240 24-bit colour LCD and capacitive touch panel.

A simple and elegant menu system has been designed to be intuitive to navigate allowing the user to access all the features of the RL Series unit very quickly.

The high-resolution screen is easy to read presenting comprehensive metering, routing and status information to the user.

Firmware updates of the RL Series unit are achieved via a dedicated USB micro AB connector on the front panel. There is also a dedicated 3.5mm jack socket for the headphone output

Stacks Image 30

On the rear of the RL Series unit there are 4x Primary and Secondary ports for up to 4x AoIP inputs. 2x balanced line outputs on 3 pin male XLRs and AES output also on 3 pin male XLR. These outputs can be configured to follow the main volume settings of the speakers/headphones or they can also be set to follow the main Mute control.

Additionally, there is an AES input via 3 pin female XLR connector

The RL Series unit can be powered via either of the two 2.5mm DC input connectors requiring 24V @ 2A. These inputs also have a screw lock to prevent accidental unplugging. Using both inputs provides redundancy.

    Mixers
See the product