Cart
← Back to Product Catalog

S-Track – DC8

Speakers

More details

Similar Products

VEXO115-B-W
  • AUDAC

AUDAC – VEXO115A

The VEXO series are compact high performance 2-way active loudspeakers and come in 3 different models, each of them with different sizes and performances meeting the requirements of every application. The low-frequency transducer, which is made out of high-quality materials, is combined with a 1.7” voice coil compression driver, enabling high sound pressure levels and a tight driver response with a rotatable 90° x 70° coverage pattern for a wide range of applications. Thanks to the unique driver composition, the VEXO115A delivers a clear and natural sound with an RMS power of 500 Watts and a maximum power of 2000 Watt. The frequency response (±3dB) starts from 50Hz up to 20 kHz and the sensitivity (1W/1m) reaches 100dB while a maximum continuous sound pressure level from 127dB can be achieved.
    Speakers
See the product
martin-audio-xe300
  • Martin Audio

Martin Audio – XE300

The XE300 is the definitive, high-performance compact monitor. It features a high-specification 12” (300mm) LF /1.4” exit HF Coaxial Differential Dispersion driver to deliver perfect sound over the artist’s listening plane.  The XE300 is the definitive, high-performance compact monitor. It features a high-specification 12” (300mm) LF /1.4” exit HF Coaxial Differential Dispersion driver to deliver perfect sound over the artist’s listening plane. The LF driver section has a 3” (75mm) voice coil and efficient motor with an aluminium demodulating ring to minimise distortion, while the HF driver utilises a 1.4” (35mm) exit HF compression driver with a 3” (75mm) pure titanium diaphragm.                              The SX118 is Dante-enabled when paired with a Martin Audio iKon ik42 or iKon ik81 amplifer.
    Speakers
  • Dante Ch: 0x0
See the product
fohhn-DLI-230_1200px
  • Fohhn

Fohhn – Linea Focus DLI-230 DAN

The active, electronically inclinable DLI-230 DAN line source speaker enables intelligent and target-oriented sound coverage in venues that have the most difficult acoustic conditions. Using intuitive software, both the vertical dispersion characteristics and the inclination angle of the loudspeaker beam can be precisely adjusted – in real time – to perfectly suit to the room’s acoustic situation. The Linea Focus DLI-230 DAN is a high performance line source system, which can be electronically controlled and monitored. The system is equipped with 16 state-of-the-art Class D amplifiers and DSP technology specially developed for this area of application, plus 16 coated 4” long excursion drivers. This perfect balance of amplifier-, digital signal processor- and loudspeaker technology enables a maximum SPL of 130 dB to be achieved. The DLI-230 DAN comes with a digital input interface for DANTE. The loudspeaker’s vertical beam dispersion characteristics can be intuitively controlled – in real time – using FOHHN AUDIO SOFT: The vertical beam width, ranging from 0° to 90°, and vertical inclination angle, ranging from -40° to +40°, can both be adjusted in precise 0.1° increments. This means that unwanted reflections from floors and ceilings can be avoided. The result: optimum levels of speech intelligibility, a pleasing sound image and excellent sound quality – even in the most challenging acoustic conditions.
    Speakers
  • AES67 Enabled
See the product