Cart
← Back to Product Catalog

Quicklink – ST150

I/O Interfaces

More details

Similar Products

audio-ltd-a10-Rack
  • Sound Devices

Sound Devices – A10-RACK

The A10-RACK offers convenient mounting, powering, RF, and audio connectivity for four uni- or SuperSlot wireless receivers in its 1 RU chassis. It is designed for dual-channel receivers from Audio Limited, including the A10-RX, plus slot receivers from Lectrosonics and Wisycom. The A10-RACK includes built-in antenna distribution with powering for active antennas. Up to eight channels of audio from single or dual-channel receivers appear on both its XLR outputs and over Dante™ audio-over-Ethernet.
    I/O Interfaces
See the product
ABX-6-Vorderseite
  • Fohhn

Fohhn – ABX-6

The ABX-6 Dante breakout box can be equipped with up to two 1000Base-X fiber transceivers (SFP module). That allows for redundant applications via fiber optical cable. Additionally, it has two 1000Base-T ethernet connections. Thus, ABX-6 supports a convenient connection to Focus Venue, Focus Modular or DI Amplifiers over long distances.

Main features

  • SFP ports for 1000Base-X fiber transceiver (Dante Primary und Secondary)
  • 1000Base-T Ethernet connections (Dante Primary und Secondary)
  • Up to eight audio channels: 2 × AES/EBU, 2 × Airea connect
  • Fohhn Net control signals are transmitted over ethernet
  • Integrated Dante Brooklyn II module
    I/O Interfaces
  • Dante Ch: 8x0
  • 24-bit
See the product
neutrik-DANTE_Adapter-NA2-IO-DLINE|neutrik-DANTE_Adapter-NA2-IO-DLINE
  • Neutrik

Neutrik – NA2-IO-DLINE

This ruggedized handy box lets you connect your legacy audio gear to the Dante™ world. It works both as a ramp-on device to convert an analog LINE signal into a Dante™ signal and as a ramp-off box to come out of the Dante™ network with an anlog signal. Both can happen siumultaneously! The NA2-IO-DLINE is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a Dante™ network. Simultaneously, NA2-IO-DLINE converts a Dante™ stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the Dante™ network while at the same time receiving a mix from another Dante™ source. NA2-IO-DLINE is designed for harsh stage conditions. It therefore features lockable chassis connectors for both the audio and network connections. For fixed installations, the rubber protection can be removed. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.
    I/O Interfaces
  • Dante Ch: 2x2
  • 16-bit, 24-bit, 32-bit
See the product