Cart
← Back to Product Catalog

ProCo – AoDiMX4

I/O Interfaces

More details

Similar Products

aeq-netbox-4mh
  • AEQ

AEQ – NetBOX 4 MH

The NETBOX 4MH interface has been designed to cover the need for high quality microphone inputs and headphone outputs availability outputs, for example in radio and TV studios, stage or multimedia installations. The multichannel IP connectivity (Audinate DANTE™ protocol) makes the Inputs of the unit available at any point of the network. The NETBOX 4MH interface has been designed to cover the need for high quality microphone inputs and headphone outputs availability outputs, for example in radio and TV studios, stage or multimedia installations. The multichannel IP connectivity (Audinate DANTE™ protocol) makes the Inputs of the unit available at any point of the network. NETBOX 4MH interface also includes 4 General Purpose inputs and outputs (GPIO) as interfaces for signaling transport between the different devices in the IP network. As a complementary feature, the unit is soporting the same inputs and outputs as analogue balanced line Inputs and Outputs. Further, the new interface has additional GPIOs that can be used in for example a studio installation and as an interface to signaling terminals such as the AEQ SRC 03. This greatly facilitates the implementation of services such as remote CUE and Cough-cut, User keys, ON AIR and READY lights, etc. Technical specifications
  • Channels: 4 microphone-line input, 4 line outputs, in parallel with 4 stereo headphone outputs. Mute and gain control between +12 and -30 dB, individually or in stereo pairs.
  • 48V Phantom Power supply and electronic balancing for all microphone inputs.
  • Data format: DANTE Audio-over-IP technology.
  • Scalable and flexible network topology supporting a wide range of audio transmitters and receivers.
  • Supports 100Mbps, 1 Gbps and 10 Gbps network segments.
  • 2 x RJ45, 100 BASE-T Ethernet ports with galvanic isolation, usable as “daisy chain” connections.
    I/O Interfaces
See the product
symetrix-xOut-4_1200px|symetrix-xOut-4_1200px
  • Symetrix

Symetrix – xOut 4

The cost effective xOut 4 increases a system’s analog output channel capacity resulting in a reduction in overall price per channel. The cost effective xOut 4 increases a system’s analog output channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog outputs’ parameters (mute), along with bus assignments, are configured using Symetrix Composer open architecture software. xOut 4 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space, or, if preferred, the xOut 4 may be surface mounted. Features
  • Audio output (D/A) expander for systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring overall system
  • costs down.
  • 4 line outputs with the industry leading performance specifications of Edge and Radius.
  • Configured with Symetrix Composer. No third party software, archaic DIP switches, or complicated front panel menus.
  • Network audio expansion using Dante protocol over standard IT networks. Ultra low latency.
  • Rack mount and surface mount kits sold separately.
    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit
See the product
yamaha-RSio-64D_1200px|yamaha-RSio-64D_1200px
  • Yamaha

Yamaha – RSio64-D

The RSio64-D is an audio interface that can convert between Dante and Mini-YGDAI formats for up to 64 inputs and 64 outputs.  The RSio64-D is an audio interface that can convert between Dante and Mini-YGDAI formats for up to 64 inputs and 64 outputs. It provides versatile routing capability as well. Four Mini-YGDAI card slots allow cards for a wide variety of input/output formats as well as processing functions to be connected to a Dante network for live sound, broadcast, recording, post production, and other applications. The RSio64-D also supports remote setup from CL and QL series consoles. Features
  • Accepts a wide range of Mini-YGDAI input/output and processing cards
  • Seven general routing presets, including routing between Mini-YGDAI cards
  • Supports matrix patching from R Remote V3 or a CL/QL series console
  • Sample rate converters for all four Mini-YGDAI slots
  • EXT DC INPUT for redundant power supplies
  • Supports Dante redundancy (primary/secondary)
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit, 32-bit
See the product