PreSonus – StudioLive 312AI


More details

Similar Products

worxaudio-waveseries-15S_600px
  • WorxAudio

WorxAudio – WaveSeries 15S

The 15S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of Wave Series loudspeaker systems to 31Hz. It has a long excursion 15-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 15S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of Wave Series loudspeaker systems to 31Hz. It has a long excursion 15-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 15S is ideally suited for music reproduction and operates as a low frequency section in conjunction with other Wave Series enclosures, or as a sub bass section for any loudspeaker system requiring enhanced low frequency performance. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 15S can be purchased in two versions. The portable configuration has large recessed handles and a stand mount, while the installation version has a standard twelve point flyware system. Both are available in white, dark black or unfinished exterior. The 15S loudspeaker is designed to satisfy a wide variety of low frequency audio applications and offers extraordinary performance and value.
    Speakers
Amadeus_PMX_15D_1000px|Amadeus_PMX_15D_1000px
  • Amadeus

Amadeus – PMX 15 D

The PMX 15 D system hosts a coaxial driver with a 15-inch (38 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 15 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms. The PMX 15 D system hosts a coaxial driver with a 15-inch (38 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 15 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms.  Each speaker channel is under control by a powerful, 64-bit digital processing unit capable of a 118 dB dynamic range. Each of these on-board DSP units include a module dedicated to managing core system parameters including system EQ, time alignment between sections, limiting, and transducer thermal protection. This level of control makes the PMX D Series fully protected and able to operate at the full extent of its abilities.
    Speakers
2017225113044|2017225113044 (1)
  • BARE

BARE – BR-10E6 E8

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

    Speakers