Cart
← Back to Product Catalog

Powersoft – Ottocanali 8K4 DSP+D

Amplifiers

More details

Similar Products

KS-audio-TA-4D_1200px|KS-audio-TA-4D_1200px
  • KS Audio

KS Audio – TA 4D with F MOD

4-channel power amplifier for F MOD with optional DANTE interface card. A unique solution for all applications in the field of professional sound reinforcement. From a linear 4-channel power amplifier to a “digital controlled multiway PA system”, any conceivable configuration is available simply by channel-wise program change or exchange of a controller module on the front. KS Audio TA 4D - 4-channel power amplifier for F MOD with optional DANTE interface card. With the newest Controller F MOD, all KS AUDIO systems can be operated with the most modern linear-phase FIRTEC equalization, simply by downloading new programs from the internal memory. 8 balanced XLR connectors and 4 Speakon power outputs are automatically adjusted in their function: the power outputs switch over to “bi-amp” or “bridge” mode when necessary, the XLR’s can be alternately used as input or output, both for analog and AES/EBU signals. One slot is intended for the optional DANTE card. Thus 8 further audio inputs are available. An Ethernet switch allows simple daisy-chaining.
    Amplifiers
See the product
ED2-1500
  • ENNE

ED2-1500

The ED Series is a new digital amplifier launched by ENNE which has built-in high-accuracy DSP built-in router , supporting UDP and network monitoring. Supporting AES3 digital audio and Dante™ digital audio transport(only for models with Dante™),supporting Dante™/Analog automatic backup supporting both low-z and high-z output.
    Amplifiers
See the product
nXe-3.04_600px|nXe-3.04_600px
  • Ashly Audio

Ashly – nXe3.04bd

The nXe3.04bd is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
See the product