NJR-AB08DAN


More details

Similar Products

aurora-hte-rx2_600px
  • Aurora Multimedia

Aurora Multimedia – HTE-RX2

The HTE-RX2 is an HDBaseT receiver. The HTE-RX2 is an HDBaseT receiver.
  • 4K60 4:4:4 HDR 18Gbps
  • 100m (330ft) with Unshielded Cable
  • HDMI® 2.0/HDCP 2.2
  • Audio DSP & Dante™/AES67 Options 2 or 8 Channel
  • Operate & Power both TX & RX from a PoE Switch
  • HDMI® Output(s)
  • 10/100 LAN Port(s)
  • USB 2.0 Device/Host with Selectable Direction
  • IP, RS-232 & IR Control
    Audio Embedders & De-Embedders
  • Dante Ch: 8x0
  • AES67 Enabled
AVN-DIO10
  • Sonifex

AVN-DIO10

The Sonifex AVN-DIO10 Dante to 3G/HD/SD-SDI Embedder/De-Embedder is the easiest way to connect legacy SDI equipment to the Dante network, and can be used for simultaneous embedding and de-embedding of 16 channels of audio. The Sonifex AVN-DIO10 Dante to 3G/HD/SD-SDI Embedder/De-Embedder is the easiest way to connect legacy SDI equipment to the Dante network, and can be used for simultaneous embedding and de-embedding of 16 channels of audio. This simple plug and play audio/video interface provides a convenient and elegant method of connecting legacy 3G/HD/SD-SDI equipment to the Dante AoIP audio network.
    Audio Embedders & De-Embedders
  • Dante Ch: 16x16
  • 16-bit, 24-bit, 32-bit
ZW-D1
  • ZenWin

ZW-D2

Features
  • It can display the current IP and other settings.
  • Gain and other parameters can be set in the software
  • Connect directly to the network using Ethernet cables
  • Dante devices can be controlled in remote mode
  • Dual port backup, PoE power supply, and independent external power supply
  • 4 microphone/line input with phantom power supply, 4 line outputs
  • The entire scalable Dante system has 512 bidirectional audio channels
Technical specifications:
  • Frequency response 20-20kHz
  • Input impedance of 2k ohms (microphone); 68 ohms (line)
  • Output impedance of 100 ohms (microphone); 100 ohms (line)
  • High pass filtering at 80 Hz, 18 dB/octave
  • Sampling rate 48K
  • Power consumption less than 5w
  • Total harmonic distortion<0.01%
Interface:
  • (Input) Balanced audio, quick connect to 4 header ports
  • (Output) Balanced audio, quick connect to 4 header ports
  • 1 independent power interface
  • 2 Dante network interfaces
  • Phantom power supply+48V
  • Power supply requirement+48V DC or IEEE802.3af PoE
  • Dimensions 44mm x 210mm x 166mm
    Audio Embedders & De-Embedders
  • Dante Ch: 0x2
  • 24-bit