Cart
← Back to Product Catalog

nexgentec – NGTC-32140PWR

Amplifiers

More details

Similar Products

rdl-sf-np40d
  • RDL

RDL – SF-NP40D

The SF-NP40D is an audio power amplifier that converts two Dante network audio channels to two 4 Ohm or 8 Ohms amplified outputs.  The SF-NP40D is an audio power amplifier that converts two Dante network audio channels to two 4 Ohm or 8 Ohms amplified outputs. Each output provides 20 watts into 8 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. A front-panel blue LED illuminates when the SF-NP40D is powered from its included external 24 Vdc power supply. The module is equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stages produce minimal heat for all levels of expected voice or music modulation. Valid synchronization to the Dante network is indicated by a green LED visible from the front of the unit. The SF-NP40D is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems. Features:
  • Converts Two Dante Network Audio Signals to two 20 W Outputs into 8 Ohms
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • 0 dBFS Input for 20 W per channel into 8 Ohms or 15 W per channel into 4 Ohms
  • Special Software Not Required for Module Setup
  • LED Indicator for Network Sync
  • High-Efficiency Class D Operation
  • Thermal and Short-Circuit Protection
  • Included Power Supply 100 to 240 VAC, 50/60 Hz, 1.5A Input; 24 Vdc Output
  • SF-NP40D includes North American Cord; SF-NP40DE excludes Power Cord
    Amplifiers
See the product
XTA-DNA-80
  • XTA

XTA – DNA40

The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Fast rear panel switching allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs. Connect to a DPA amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product
CP354D 4 x 350W with 4×4 Dante
  • Apex Audio

CloudPower CP354D

CloudPower 4-channel Class-D amplifier is built for easy remote control and monitoring using the IntelliCloud WebUI, reducing site visits.  It features fully integrated DSP and GlidePath architecture for ultra-low distortion, along with True Cone Excursion to extend speaker life. The ‘D’ models include 4×4 Dante integration, and it supports both low impedance and 70/100v speakers. Designed for networked or standalone setups, it also includes a high-visibility OLED display, ultra-quiet airflow management, and operates with high efficiency and low idle power in a slimline 1U chassis with a universal power supply and PFC.  
    Amplifiers
  • Dante Ch: 4x4
  • 32-bit
See the product