Cart
← Back to Product Catalog

NetPA U 2004 FX

Amplifiers

More Details

Similar Products
  • Extron Electronics

NetPA U 4004 FX

The Extron NetPA U 4004 FX is a four channel, high performance Dante-enabled power amplifier with software configurable outputs that can simultaneously drive 8 ohm, 4 ohm, 70V, or 100V loads in multi-zone systems. For maximum flexibility, the total power of two adjacent 400 watt channels is shared, delivering up to 800 watts per single channel, according to system requirements. With its integrated DSP, the NetPA U 4004 FX includes essential signal processing for complex, decentralized systems while AES67 support ensures compatibility with other network audio devices. This Ecofficient Level 2 design features InstaWake, the ability to go from standby to full power in under 50 milliseconds. The fan cooled 1U enclosure does not require empty rack spaces for ventilation and includes front and rear rack mount hardware for stability.
    Amplifiers
  • 24-bit
  • 48kHz
See the product
  • AudioControl

Bijou 5100D

Bijou Series Five-Channel Integrated Amplifier with Line-level Subwoofer Output and Dante Audio
  • HDMI eARC input transfers uncompressed high-bandwidth source audio, including Dolby Atmos, Dolby TrueHD, and DTS-HD Master Audio.
  • GaN-based high-power, hyper-performance, Class-D amplifier design
  • 65 W into 8 Ω, 130 W into 4Ω, all channels driven
  • Dante audio networking support
  • Analog and Digital Inputs; Analog Stereo Preamp and Subwoofer outputs
  • IP and IR-Controllable for seamless third-party automation compatibility
    Amplifiers
  • Dante Ch: 2x2
  • 24-bit
See the product
bose-powershare-404d
  • Bose Professional

Bose – PowerShare PS404D

PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 400 watts for installed applications.  Put the power where you need it. PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 400 watts for installed applications. This means you can distribute the total 400 watts asymmetrically across all outputs or use any individual output to deliver full power. And with support for both low- and high-impedance loads up to 100V, it’s easy to adapt PowerShare amplifiers to a wide range of applications. ControlSpace Designer software allows for Ethernet-based configuration and quick setup of external control options. With onboard Dante® audio networking, you have the flexibility to place PowerShare amplifiers away from source locations and closer to loudspeakers. This unique set of features and technologies makes PowerShare one of the most versatile, high-performance amplifiers available today. Features
  • PowerShare Technology Distribute the total 400 watts asymmetrically across all outputs using patented PowerShare technology, which allows each output to deliver full power. Instead of selecting amplifier power based on the needs of the largest zone, you now have the freedom to use total amplifier power in any application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
  • Load-independent Outputs Configure any channel for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging or using jumpers.
  • Integrated Dante Audio Networking Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs as selected in ControlSpace Designer software.
  • Dual Feedback Loop System Improve performance and reliability. The Dual Feedback Loop system, inherited from the field-proven Bose PowerMatch amplifier line, allows for continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion while protecting loudspeakers.
  • ControlSpace Networking Configure using ControlSpace Designer software for inclusion into larger networked audio systems where end-user controllers and scheduling events can control amplifier parameters.
  • Integrated Loudspeaker Processing Adjust various parameters using ControlSpace Designer software: nine-band PEQs, matrix mixing, crossover, limiters, delay, mute/output polarity, and more.
  • Auto-standby Save power — PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.
Applications
  • Performing arts venues
  • Places of worship
  • Conference centers
  • Retail stores
  • Restaurants and bars
  • Hospitality venues
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product