Cart
← Back to Product Catalog

NA-2I-DLINE

I/O Interfaces

Learn more

Similar Products

rdl-dds-bn40_1200px_0|rdl-dds-bn40_1200px_0
  • RDL

RDL – DDS-BN40

The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics. The four XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The outputs are connected through a detachable terminal block. The outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN40. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN40 in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN40 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN40’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
See the product
Crewcom CXD-32CF
  • Pliant Technologies

CrewCom CXD-32CF

The CXD-32CF 32×32 I/O Digital Audio Network Interface is a 32×32 48kHz I/O device that supports Dante® and AES67. It provides routing and expansion capabilities into and out of a CrewNet infrastructure via EtherCon Copper and Dual LC Fiber connections. This half-rack device can be powered with either net power over a CrewNet copper connection or via the supplied 48VDC power supply (PPS-48V-02).orking in the field. KEY FEATURES:
  • 32 x 32 I/O Dante-Based Digital Audio I/O
  • Includes an AES67 Operation Mode
  • Single EtherCon/Dual LC Fiber CrewNet Port
  • Primary and Secondary Redundant EtherCon/Dual LC Fiber Dante Ports
  • Supports 48kHz Sampling Frequency
  • Front and Rear Panel Status Indicators
  • Micro USB Connection for Firmware Updates
  • Dual Powering Options
  • Network Power (Power over CrewNet)
  • External Power (48VDC) (Included with Product)
  • Compact 1U Half-Rack Size Chassis Design with Forward or Rear-Facing Orientation (rack kits sold separately)
    I/O Interfaces
  • Dante Ch: 32x32
  • 24-bit
See the product
focusrite-rednet-HD32R_600px|focusrite-rednet-HD32R_600px
  • Focusrite

Focusrite – RedNet HD32R

RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system is connected to the HD32R via standard Mini DigiLink ports.
  • Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD & Pro Tools|HDX .
  • Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors.
  • Provides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro Tools|HD. 
  • Cost-effectively increase audio I/O quality and flexibility with RedNet interfaces.
  • Permits multiple workstations to access the same interface hardware and I/O.
  • No changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro Tools|HD inputs and outputs.
  • Up to 32 I/O with Pro Tools|HD over single DigiLink connection per RedNet HD32R.
  • Additional Avid/Digidesign interfaces may be connected to expansion ports.
  • Upgrade to RedNet interfaces while remaining fully compatible with TDM- or AAX-DSP-based plugins and saved sessions.
    I/O Interfaces
  • Dante Ch: 32x32
  • 16-bit, 24-bit
See the product