Musicrown – DF1208MN


More details

Similar Products

ASL-ENC-1102_1200px|ASL-ENC-1102_1200px
  • ASL

ASL – Enchorus ENC 1102

The ENCHORUS ENC 1102 Dante™-based audio network module offers six AES3 outputs and six AES3 inputs with a four-band equalizer on each input and output. The ENC 1102 features eight built-in mixing engines and support for sample frequencies up to 192kHz. The device is easy to control and monitor through a web interface. A built-in audio matrix allows flexible routing of all inputs, outputs, and mixer signals. The ENCHORUS Dante™-based audio network was designed specifically for stage applications, offering professional connectors and superior audio quality. All ENCHORUS models include filtering and mixing capabilities and can be configured very rapidly via the integrated web interface. ENCHORUS modules are tough enough on their own but also include rubber bumpers that allow them to be easily and safely stacked on stage.
  • Throw-down Box
  • 6x AES3 outputs
  • 6x AES3 inputs
  • Support of redundant Dante networks or daisy chainable
  • Four-band EQ for each input and output
  • 8x built-in mixing engines (16 inputs, stereo output)
  • Built in audio matrix for flexible routing of all signals
  • Control via web interface
  • Sample rates: 44.1kHz/48kHz/88.2kHz/96kHz/176,4kHz/192kHz
  • Sample rate converter on AES3 inputs from 8kHz to 192kHz
  • 19” rack-mounting kit available
    I/O Interfaces
Q_dn_axon_D2i_front_hero
  • Attero Tech by QSC

Attero Tech by Q-SYS – Axon D2i

The Attero Tech by QSC Axon D2i is a single-gang, Dante/AES67 network audio I/O wallplate for network AV systems, including the Q-SYS Ecosystem. With two balanced mic/line inputs in a cost-effective form-factor, it provides easy integration of analog devices into a wide range of network audio applications. A Q-SYS Extension further simplifies integration, letting integrators quickly add the Axon D2i to Q-SYS installations without the need for any programming.

    I/O Interfaces
rdl-ddb-bn40_1200px
  • RDL

RDL – DDB-BN40

The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics. The four XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The outputs are connected through a detachable terminal block. The outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN40. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN40 in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN40 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN40’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces