Martin Audio – CDD-LIVE 8


More details

Similar Products

worxaudio-waveseries-8A_600px|worxaudio-waveseries-8A_600px
  • WorxAudio

WorxAudio – WaveSeries 8A

The 8A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 8A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 8A has a one-inch exit compression driver coupled to a 75 X 75 degree wooden waveguide horn reproducing high frequencies, and an 8-inch cone transducer in a tuned enclosure for the low frequencies. A high quality passive network operates very efficiently, also providing EQ points for a flat frequency response. The sturdy multi-ply plywood enclosure, with a multi layered catalyzed Polyurea finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 8A can be purchased in two versions. The portable (8A) configuration has large recessed handles and a stand mount, while the (8Ai) installation version has a standard twelve point flyware system. Both are available in white, black or unfinished exterior.
    Speakers
Amadeus_PMX_15D_1000px|Amadeus_PMX_15D_1000px
  • Amadeus

Amadeus – PMX 15 D

The PMX 15 D system hosts a coaxial driver with a 15-inch (38 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 15 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms. The PMX 15 D system hosts a coaxial driver with a 15-inch (38 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 15 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms.  Each speaker channel is under control by a powerful, 64-bit digital processing unit capable of a 118 dB dynamic range. Each of these on-board DSP units include a module dedicated to managing core system parameters including system EQ, time alignment between sections, limiting, and transducer thermal protection. This level of control makes the PMX D Series fully protected and able to operate at the full extent of its abilities.
    Speakers
K-array_-_KMT218_525pxl|K-array_-_KMT218_525pxl
  • K-array

K-array – KMT218

KMT218 is much more than a standard dual 18" powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm. KMT218 is much more than a standard dual 18" powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm. All DSP functions, including EQ can be controlled with remote managing software via USB or RS485 on a standard XLR. To optimize performance, the onboard DSP includes presets to drive K-array speakers. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.
    Speakers
  • Dante Ch: 2x0
  • 24-bit