K-array - KMT218

K-array – KMT218

Product Information

KMT218 is much more than a standard dual 18″ powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm.

KMT218 is much more than a standard dual 18″ powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm. All DSP functions, including EQ can be controlled with remote managing software via USB or RS485 on a standard XLR. To optimize performance, the onboard DSP includes presets to drive K-array speakers. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.

MONISMS – MNS-8130WS

The MONISMS MNS-8130WS is a digital steerable active wall-mounted wooden speakers with DANTE®-Input. The MONISMS MNS-8130WS is a digital steerable active wall-mounted wooden speakers with DANTE®-Input. Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment. Used High Quality speaker units, LF: 8"*1 and HF: 3"*2 It support Wall mount or Bracket install , No matter what vertical or horizontal install allows for Quick, Easy and Flexible installation.

Speakers

See the product

DMIX

DMIX – CX108P

Speaker model: CX108P

Speaker type: 8”Active coaxial loudspeaker

Unit configuration: LF: 8" unit 2"(50mm）Voice coil

HF: 1.7"（44mm）Voice coil driver

Frequency response: 80Hz-20kHz(-10dB)

Rated power: LF: 140W， HF: 40W

Sensitivity: LF: 95dB， HF: 105dB

Sound pressure level： 121dB (peak)

Radiation Angle: 90°×90°

Crossover point: DSP control

Size (mm) : 344×270×256 (W×H×D)

Module amplifier power: HF：100W，LF：200W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante

Speakers

See the product

Genelec

Genelec – 4410A

The newest and most compact Smart IP loudspeaker, the 4410 uses PoE to produce uncompromised SPL and acoustic performance. Offering extraordinary coverage, clarity and intelligibility, the 4410 is manufactured in Finland using certified sustainable methods - providing decades of reliable service.

The 4410 integrates tightly with Genelec Smart IP Manager software - which allows installers to configure an almost unlimited number of rooms, zones, loudspeakers and audio channels, and includes device discovery, a versatile room EQ tool set, system organisation and status monitoring.

Day-to-day end user control of basic functions can then be achieved via integration with third party automation systems, or via the simple Smart IP Controller mobile device app.

Speakers

See the product

K-array – KMT218

Product Information

Similar Products

MONISMS – MNS-8130WS

DMIX – CX108P

Genelec – 4410A

Support

Company

Dante Networking Alliance

K-array – KMT218

Product Information

Similar Products

MONISMS – MNS-8130WS

DMIX – CX108P

Genelec – 4410A

I would like to receive product notices, training and event information and Dante product marketing updates via email. Opt-out at any time. For further details, including about your rights, see our Privacy Policy.