Lawo – Power Core


More details

Similar Products

extron-axi22at_0|extron-axi22at_0
  • Extron Electronics

Extron – AXI 22 AT

The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. It features two mic or line inputs on a 3.5 mm captive screw connector, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 22 AT also features two line level outputs for routing any two Dante channels from the network to the audio system. The AXI 22 AT interfaces with any Dante-equipped audio processor,  and can be powered through PoE.
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
directout-exbox-md_1200px|directout-exbox-md_1200px
  • DirectOut

EXBOX.MD

EXBOX.MD is a Dante / MADI converter which is equipped with three MADI ports (optical SC, coaxial BNC, SFP) and four network ports. It offers straight-forward conversion of 64 audio channels between MADI and Dante. The handy size of the popular EXBOX series (1/3 of 19’’), combined with the rock-solid housing and redundant power supplies, makes the EXBOX.MD a perfect connectivity tool for touring live shows, OB vans as well as studio applications. Audio Streaming Up to 32 streams with a total number of 64 audio channels are supported FastSRC™ The FastSRC™ is a low latency sample rate converter, switchable for the Dante I/O, and ensures seamless exchange between MADI and Dante I/O when both sources are not synchronised. EARS™ Enhanced Automatic Redundancy Switching™ is a system to prevent interruption of the output signal. Rack-Ready Each EXBOX can be mounted into a standard 19’’-rack by using the optional kit BOXMOUNT.XL.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
1569527185_1507920
  • Muxlab

Muxlab – HDMI/Dante over IP PoE Transmitter

The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network.  The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network. 100’s of Single Displays and Video Wall Displays of user configurable size (X by Y) may be supported, depending on network bandwidth. Audio can be independently distributed to 100’s of Dante supported audio devices. Supports HDR at up to 4K @ 30Hz (4:2:2). The unit can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch, and supports PoE (PD) when powered by a PoE (PSE) Ethernet Switch. An IR Emitter or IR Sensor, if required, may be purchased separately for IR based remote control applications.
    I/O Interfaces