Cart
← Back to Product Catalog

Kevic – MA3224

Amplifiers

More details

Similar Products

iAC_2X240_Dante
  • AMC

AMC – iAC2X240

Two-channel Class-D amplifier with 2X240 W power outputs. Designed for 100 V and low impedance high-quality background music systems. Also, it can be bridged even in 100V mode and used as a single-channel 480W amplifier for 100V audio systems. Containing Dante digital input card, Balanced Phoenix & Stereo RCA input and audio link output connectors. Amplifiers have an RS232 control port for integration amplifiers with third-party automation systems that allow using iAC amplifiers in large and complex audio systems that can be automated and controlled remotely. Due to the integrated signal processor, amplifiers' volume level, tone control, mute, and standby status can be controlled with a rotary selector and also by RS232 protocol.

    Amplifiers
See the product
CMX - Power amplifier with DSP & Dante
  • CMX

CMX – DSP-4240

The CMX DSP-4240 is a power amplifier with DSP and Dante.

  • 4 x 60W power amplifier
  • 100V, 70V, 4 Ohm & 8 Ohm output with selectors
  • Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
  • Dante network control with 4 In 4 Out matrix
  • Two Ethernet RJ-45 network connector for both Dante and DSP configure
  • Remote GPIO for failure outputs
  • 1U height 19” rack mount type power amplifier
  • Balanced line input by phoenix connector for four channels.
  • Each four inputs with separate gain control.
  • Separate four channel indicators for protection, clip, input and output.
  • Complete short circuit, overload, high temp, clip and DC protection.
  • Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
    Amplifiers
See the product
FLX-E-160-2-LZ-D
  • Stewart Audio

Stewart Audio – FLX-E-160-2-LZ-D

The FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control.
    Amplifiers
  • Dante Ch: 4x4
  • 24-bit
See the product