Kevic – CM-1122PN


More details

Similar Products

s-track-c6
  • S-Track

S-Track – C8

吸顶音箱,一般安装在天花板上,于背景音乐系统中使用,其优点是系统安装好之后音箱可以较好的隐藏。 The C8 ceiling speaker is installed on the ceiling, and used for a background music system; its advantage lies in that the speaker can be well-hidden after the system is installed. 吸顶音箱,一般安装在天花板上,于背景音乐系统中使用,其优点是系统安装好之后音箱可以较好的隐藏。 The C8 ceiling speaker is installed on the ceiling, and used for a background music system; its advantage lies in that the speaker can be well-hidden after the system is installed. 产品特性 / Product Features
  • Dante; / Dante
  • PoE 供电;/ PoE power supply
  • 80-20KHz;/ 80-20KHz
  • 前螺丝安装方式;/ front screw installation
  • 同轴,以点声源形式输出避免高音和低 / coaxial point-source output, avoiding the interference of high pitch and bass
    Speakers
ipd4cm52
  • SoundTube

SoundTube – IPD-CM52s-BGM-II

Engineered for applications with limited plenum space. Incorporates a SoundTube-specific shallow backcan with an installed depth of 3.5 inches. One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.

    Speakers
  • Dante Ch: 1x0
  • 24-bit
K-array_-_KMT218_525pxl|K-array_-_KMT218_525pxl
  • K-array

K-array – KMT218

KMT218 is much more than a standard dual 18" powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm. KMT218 is much more than a standard dual 18" powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm. All DSP functions, including EQ can be controlled with remote managing software via USB or RS485 on a standard XLR. To optimize performance, the onboard DSP includes presets to drive K-array speakers. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.
    Speakers
  • Dante Ch: 2x0
  • 24-bit