JBL Synthesis – SDR-35


More details

Similar Products

Rane_-_HAL_EXP7x|Rane_-_HAL_EXP7x
  • Rane

Rane – HAL EXP7x

The Rane EXP7x Expander for the HAL1x provides eight channels of full-featured, drag and drop Acoustic Echo Cancellation (AEC). Each channel of AEC can be added to any HAL1x system input and route to any Halogen DSP block, including the gain-sharing automixer, manual mixer, regular Room Combine block, or Conference Room Combine block. The Rane EXP7x Expander for the HAL1x provides eight channels of full-featured, drag and drop Acoustic Echo Cancellation (AEC). Each channel of AEC can be added to any HAL1x system input and route to any Halogen DSP block, including the gain-sharing automixer, manual mixer, regular Room Combine block, or Conference Room Combine block. Chain up to 32 EXP7x units to a HAL1x for 256 assignable AEC channels. Because EXP7x AEC channels are not associated with a particular hardware input, preset recall can re-assign an AEC resource across inputs / rooms as required. Drag and drop AEC supports the typical one-AEC-per-microphone configuration. With optimum acoustics, mic and loudspeaker placement, or with rarely used mics (such as audience mics) it allows mixing more than one mic into a single AEC channel, significantly reducing cost.
    DSPs (Digital Signal Processors)
  • Dante Ch: 0x0
sony-NXL-FR318_1200px
  • Sony

Sony – NXL-FR318

The NXL-FR318 is a 3RU rack mountable frame capable of holding up to 18 option boards. The NXL-FR318 is a 3RU rack mountable frame capable of holding up to 18 option boards. With two power supplies to provide redundancy, the unit is ideal for interconnecting SDI equipment with IP-based infrastructure. Option boards allow 4K/HD/SD switchable signals using copper cables or fibre optical cables with SFP+ transceiver or 10GBASE-T connections, with audio mux and demux options. Status LEDs on the front panel of the unit allow real-time monitoring, with reference input and reference time input and output status provided. Flexible slots for SDI-IP option boards Up to 18 slots in 3RU chassis. 4K/HD/SD switchable signals SDI-IP conversion using variety of interfaces, including 3G-SDI ports. SFP+ transceivers and 10GBASE-T connecter options for fibre optical and copper cables NXLK-IP400F and NXLK-IP450F option boards allow the use of fibre cables up to 10 km and twinax copper cables up to 10 m using SFP+ (Small Form-factor Pluggable Plus) ports. NXLK-IP400T option board allows the use of high-grade copper cables up to 100 m using 10GBASE-T ports. NXLK-IP45F option board provides support for Dante.
    DSPs (Digital Signal Processors)
extron-DMP-128-Plus-AT|extron-DMP-128-Plus-AT
  • Extron Electronics

Extron – DMP 128 Plus AT

The DMP 128 Plus AT is a Digital Matrix Processor featuring Extron ProDSP™ 64-bit floating point technology. It is a 12x8 audio processor with Dante, 4 channels of USB audio, 8 audio file players, an ACP bus for audio control panels, and configurable macros. The DMP 128 Plus AT is the next generation of Digital Matrix Processor featuring Extron ProDSP™ 64-bit floating point technology. The DMP 128 Plus AT is a 12x8 audio processor with up to 4 channels of digital audio input and output via USB, up to 8 audio file players, an ACP bus for audio control panels, and configurable macros. It has Dante audio networking technology with connectivity for up to 48 digital audio inputs and 24 digital audio outputs, with a mix matrix capability of 84x44. Dedicated DSP is available for each input and output, including gain, filtering, dynamics, automixing, virtual returns, and expansion capabilities to another DMP 128 unit or an Extron DTP CrossPoint 4K scaling presentation matrix switcher.
    DSPs (Digital Signal Processors)
  • Dante Ch: 48x24
  • 24-bit