Cart
← Back to Product Catalog

Inter-M – PMU 120N

Amplifiers

More details

Similar Products

MDA4-7000DM 前
  • Marani

Marani – MDA4-7000DM

MDA 4-7000DM is a high-performance and high-power touring-grade digital power amplifier. It has a total power output of 4x1600W under a 4-channel 4Ω load. Built-in powerful digital processor with 4 inputs and 4 outputs. The 4.3-inch high-definition touch screen clearly displays the system status, and the sufficient power is equipped with a powerful built-in DSP to enable this power amplifier to take into account both the fixed installation and the mobile performance market.

MDA4-7000DM adopts powerful Marani DSP, including 4 input and 4 output processing channels. Both DSP and AD/DA run at 96KHz sampling rate. The complete processing function provides a complete crossover solution for the speaker. With signal hot backup automatic switching function, 3 levels of priority can easily back up the input source.

From input gain/delay/noise gate/EQ/compression

/FIR /to output gain/delay/polarity/X-over/FIR/EQ/RMS compressor/Peak limiter, there are up to 13 PEQ types to choose, The output crossover filter includes the classic Linquez Rayleigh/Bessel/Butterworth, and the MARANI brand unique NXF（Northed X-over Filter）, built-in FIR filter, and newly added MIR linear phase filter can make the phase of the crossover point easier to join while maintaining a very low delay. All the functions we provide are designed to help you better restore the sound.

    Amplifiers
  • 96kHz
  • AES67 Enabled
See the product
vseries
  • RAM Audio

RAM Audio – V6000

RAM Audio® introduces this new generation of professional touring amplifiers based on the field proven QuantaPulse™ Technology: V Series / W Series (with only aesthetic differences).

 These new devices feature two or four channel models, ready for rough handling in the touring world. For this purpose, V/W Series amps implement oversized high efficiency regulated power supply with PFC front end to deliver their full performances independently of mains status.

This together with oversized high efficiency audio power stage, forced front to back cooling through a component-free path with removable front panel dust filters, improved rugged mechanical design with even weight distribution, full digital control from LCD display on the front panel… Resulting in: just power, reliability and robustness for your touring gigs!

V6000 Specifications:

Power tableV6000
2 ohm2x3025W
4 ohm2x1600W
8 ohm2x820W
Bridge 4 ohm1x6050W
Bridge 8 ohm1x3200W
V6000
Frequency Response (power bandwidth ±0.25dB)20Hz – 20kHz
Phase Response (@1W 20Hz-20kHz)±15 deg
Total Harmonic Distortion (20Hz-20kHz)<0.05%
Intermodulation Distortion (SMPTE)<0.05%
Damping Factor (@8ohm)>500
Crosstalk (20Hz-1kHz)>80dB
Voltage Gain26 dB to 38 dB (0.5 dB steps)
Sensitivity (rated power 26/32/38dB Gain)4.0/2.0/1.1V
Signal to noise Ratio (20Hz-20kHz)113dB
Required
AC Mains		Operating Voltage (50Hz-60Hz)
Power On Idling (@230V)0.5A
1/8 rated power (@230V min. Z)7A
Dimensions (WxHxD)483×88.9x460mm – 19×3.5×18.1inches
Weight (Net)10kg – 22.1lb
    Amplifiers
  • AES67 Enabled
See the product
NPA23_D2
  • Kingray

Kingray – NPA23_D2

NPA23-D2 is a 2*300W8Ω class-D amplifier, which configures with 2-channel Dante input interface and DSP processing solution such as compressor, limiter, noise gate, parameter equalization, matrix routing, delay, etc. Suitable for various scene with demands of sound reinforcement system. The whole series of products are equipped with TCP/IP communication interface, mobile phone App control, GPIO extension control and Mconsole unified management.

◆ Optional 2-channel Dante network audio input  

◆ Support Mconsole and app TCON network control 

◆ IPS color LCD

◆ Built in DSP digital processor

◆ Multiple control modes are supported: USB、TCP/IP、RS232、RS485

◆ Monitor the working state of power amplifier

◆ Call and standby the amplifier by remote

◆ Support balanced XLR input and unbalanced RCA input

◆ Support stereo, bridge, mono, matrix mode, switch by software

◆ Input sensitivity 0dBU / 6dbu setting by software or LCD

◆ Power on state: Power On/Standby

◆ Constant Pressure and Resistance support:100V、70V、8Ω、4Ω

    Amplifiers
See the product