Cart
← Back to Product Catalog

Glensound – Minferno/0

Commentary Systems

More details

Similar Products

ctp-systems-DCU304_1200px
  • CTP Systems

CTP Systems – DCU304

The DCU304 is a Dante enabled Commentary / Announcer unit. It has four inputs, one programme output and three talkback outputs.  The DCU304 is a Dante enabled Commentary / Announcer unit. The unit has four inputs, each selectable to left/right/both ears, one programme microphone output plus three 'lazy' talkback outputs. On pressing a talkback key the programme microphone output will be silently muted and redirected to the selected talkback output(s). The microphone also has a local line level analogue output which also mutes when a talkback key is pressed. Network connection may be either a Neutrik ethercon or a standard RJ45 connector. A LED indicates network status. Microphone gain is adjustable in 1dB steps from +70dB to +15dB and +5dB via the OLED display and lockable push buttons. 48 volt phantom power may also be selected. The DCU304 may be powered PoE or via an external 12 volt power source. The DCU304 can also be used as a cost effective Dante four wire box or as a top quality analogue or Dante mic amp.
    Commentary Systems
  • Dante Ch: 4x4
See the product
Lance_Design_-_ADX-120|Lance_Design_-_ADX-120
  • Lance Design

Lance Design – ADX-120

The ADX-120 Networked Announce / Talkback unit provides a fully-featured solution for television and radio announce booths. All required functions are included, including support for RTS format two-wire PL and IFB beltpacks. The ADX-120 is widely used in high-end sports and entertainment broadcast events. See lancedesign.com for more information. The ADX-120 Networked Announce / Talkback unit provides a fully-featured solution for television and radio announce booths. All required functions are included, including support for RTS format two-wire PL and IFB beltpacks. The ADX-120 is widely used in high-end sports and entertainment broadcast events. See lancedesign.com for more information.
    Commentary Systems
See the product
adx2400m-oblique-700
  • Lance Design

Lance Design – ADX-2400M

The ADX-2400M MADI Network Interface accepts a MADI stream as its local inputs, and outputs a MADI stream as its local outputs, making integration with the truck's or studio's audio system fast and simple.

The 24 local inputs and outputs use 24 of the 64 available MADI channels, and may be configured to use channels 1-24 or 33-56. All other MADI channels pass through the unit. This allows two ADX-2400Ms to be used in tandem on a single MADI stream.

Both optical and coax MADI inputs and outputs are available. The optical I/O uses a standard SFP module, so it may be configured for multi-mode or single-mode fiber, with wavelength and power parameters of the customer's choice.

These units may serve as the 'truck end' of ADX networked announce systems, or with other 2400s for transmission or distribution, or to provide a network interface for other vendors' networked products.

    Commentary Systems
  • Dante Ch: 24x24
  • 24-bit
See the product