Cart
← Back to Product Catalog

Glensound – Beatrice R16

Intercoms

More details

Similar Products

studio-technologies-m374a_800px
  • Studio Technologies

Studio Technologies – Model 374A Intercom Beltpack

The Model 374A Intercom Beltpack begins with the features offered by traditional party-line intercom user devices and adds a range of new capabilities along with the advanced performance and flexibility that Dante® audio-over-Ethernet provides. The Model 374A Intercom Beltpack begins with the features offered by traditional party-line intercom user devices and adds a range of new capabilities along with the advanced performance and flexibility that Dante® audio-over-Ethernet provides. With four independent talk and listen channels the Model 374A bridges the gap between typical single- and dual-channel party-line devices and permanently installed multi-channel intercom panels. Imagine the possibilities—four channels of high-quality party-line intercom in a compact, user-worn package. Key Features
  • Dante audio-over-Ethernet technology
  • Four independent talk and listen channels
  • Supports dynamic and electret microphones
  • 5-pin female XLR headset connector
  • Configurable operating modes
  • Excellent audio quality
  • Uses STcontroller for configuration
  • AES67 and Dante Domain Manager™ support
  • Power-over-Ethernet (PoE) powered
    Intercoms
  • Dante Ch: 4x4
  • 24-bit
See the product
Beatrice_B4_Plus_Angle
  • Glensound

Glensound – Beatrice B4+

The Beatrice B4+ is Glensound's first Broadway design unit, with 4 x FW & 4 x IFBs to the Dante/AES67 Network. The B4+ can interfacewith 4 completely separate network locations.

The deisgn of the B4+ is ultra compact to make the unit as unobtrusive to the operator as possible.

The microphone input is on a 3 pin XLR and features gain adjust and 48V phantom power. The XLR connector can be specified with 4 or 5 pins for headset connections.

Four separate talk buttons route the microphone input to either of the 4 network outputs. The button operation can be configured as momentary, latching or intelligent. A double tap on any of the talk buttons will produce a 'call' signal alert that will be received by another Beatrice unit. An LED indicates an incoming call alert, which will also produce an audio indication on the headphones.

Each input has a separate level control adjust and a signal present indicator.

    Intercoms
  • Dante Ch: 4x4
  • 48kHz
See the product
Beatrice_P2_angle_BAN
  • Glensound

Glensound – Beatrice P2

The Beatrice P2 is a phone handset for Dante® network intercom. The user of the handset on the P2 unit can listen to two audio feeds from the network and send two audio channels out onto the network. Depending upon how the Dante® network has been routed the incoming audio circuits and outgoing circuits can be different locations and the outgoing circuits can be routed to multiple locations. Audio to the handset from the two network sources is routed to the telephone's earpiece only when the handset is off the hook. when the handset is picked up (off hook), the handset's microphone is turned on and two switches allow the operate to route the handset's microphone to one or other (or both) of the outgoing network audio channels.
    Intercoms
  • Dante Ch: 2x2
  • 24-bit
See the product