Fohhn – DI-2.4000


More details

Similar Products

stewart-audio-CVA16-1-CV_1200px|stewart-audio-CVA16-1-CV_1200px
  • Stewart Audio

Stewart Audio – CVA50-1-CV-D

The CVA50-1-CV-D (16W x 1 @ 70/100V) is a single cable PoE+ Dante power amplifier in a compact, plenum rated enclosure. Power and Dante over CAT5e/6 cable, simply plug and play. The PoE+ Amplifier Series leverages the higher power 802.3at PoE+ standard to power two amplifier models, the AV8-2-LZ-D (8W x 2 @ 4/8Ω) and the CVA16-1-CV-D (16W x 1 @ 70V/100V). These compact Dante™ amplifiers are designed to be single cable solutions for smaller zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it. Simply plug the PoE+ CAT 5e/6 cable into the amplifier, wire the speakers and route audio and repeat for the next zone. The plenum rating and compact size, allows this amplifier series to be placed in the air handling space, closets, the rack or any other convenient space.
    Amplifiers
ED-22B_Front
  • Keiga

Keiga – ED-22

* ED-22, Maximum supports 11Wx2@8Ω or PBTL mode for 22W@4Ω

* Built in Audio DSP for Volume, PEQ, Filter and Input Gain controls

* Dante™ Receiver as the audio input

* 2 sets two pins Euro-block Speaker output

* Signal Noise Ratio: ~ 93 dB

* Crosstalk in stereo mode: ~ - 64 dB

* THD + N (full power): < 0.5%

* Measure size: 114 (W) x 93(D) x 38(H) mm and Weight: 250g.

    Amplifiers
  • Dante Ch: 2x0
  • 24-bit
DAA-235x
  • AUDEMO-SYSTEMS

DAA-235x

DAA-2351 X = one channel amplifier; X = Power of each channel: A = 250W, B = 300W DAA-2352 X = two channel amplifier; X = Power of each channel: A = 250W, B = 400W, C = 600W DAA-2354; X = four channel amplifier; X = Power of each channel: A = 150W, B = 300W, C = 600W DAA-2358 X = eight channel amplifier; X = Power of each channel: A = 100W, B = 150W, C = 200W, D = 300W
    Amplifiers
  • Dante Ch: 8x8
  • 16-bit, 24-bit, 32-bit