Focusrite - RedNet D16R

Focusrite – RedNet D16R

Product Information

The RedNet D16R MkII is a 16-channel bi-directional AES3 interface for Dante® networks. The 1U rackmount device features individual input and output channel level controls, allowing for precise calibration and control of all input and output levels using RedNet Control. RedNet D16R MkII features power supply and Ethernet redundancy with auto switchover in case of failure.

Various connection options make RedNet D16R MkII a flexible addition to any Audio-over-IP system. A pair of DB25 multipin connectors each connect eight channels of AES3 I/O into and out of the interface, while XLR and RCA ports enable two-channel AES3 and S/PDIF connections, respectively, to be made.

Sample rate conversion on every input enables external equipment to operate at different sample rates, and DARS signals are accepted on the XLR connector. Word Clock I/O on BNC connectors allows synchronisation to house clock, or syncing external equipment to the Dante network.

Specifications

Dante Ch: 16x16
Bit Depth: 24-bit
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
AES67 Enabled

AVN-DIO15

The AVN-DIO15 is a 4 analogue XLR input to Dante converter in the Sonifex DIO range of Dante input/output devices. It features four balanced analogue XLR inputs and one Neutrik etherCON connector for direct connection to a Dante AoIP network.

I/O Interfaces

Dante Ch: 0x4
16-bit, 24-bit, 32-bit

See the product

Auvitran

Auvitran – AV-WALL-DT4i

The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm, designed to fit into a single-gang junction box (European format). It offers 2 XLR Mic inputs with 64dB gain and a line-in stereo mini Jack with 40dB gain. Gain can be controlled remotely (network) or locally (rotary button). The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm. The AV-WALL-DT4i offers 64dB of true preamp gain on 2 professional XLR Mic inputs and 40dB of gain at line level on a stereo mini Jack connector. Gain can be controlled remotely via network or locally via direct rotary push button. Internal connector allows for link with optional Bluetooth extension Wall-Plate. The AV-WALL-DT4i is designed to fit into a single-gang junction box of only 45x45mm fitting small European format. AV-WALL-DT4i is PoE enabled and thus power, control and audio data connectivity is provided by a single CAT‐5e/6 cable. The size of the main box is 44.6 x 44.6 x 50 mm. It is compatible with “Mosaic” plate of Legrand®. The depth can be adjusted between 26 to 43 mm to fit near any wall depths. Wall plate size may vary depending of the region.

I/O Interfaces

Dante Ch: 0x4
24-bit, 32-bit

See the product

TASCAM

TASCAM – ML-16D

The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. A poweful and flexible solution, the TASCAM ML-316D has 2 D-Sub intputs and 2 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.

I/O Interfaces

Dante Ch: 16x16
16-bit, 24-bit

See the product

Focusrite – RedNet D16R

Product Information

Specifications

Similar Products

AVN-DIO15

Auvitran – AV-WALL-DT4i

TASCAM – ML-16D

Stay connected to Dante

Support

Company

Dante Networking Alliance