Eventide – H9000R


More details

Similar Products

Rane_-_HAL_EXP3x|Rane_-_HAL_EXP3x
  • Rane

Rane – HAL EXP3x

The EXP3x is an 8-channel analog output & DSP expander for the HAL1x (required for operation). The EXP3x is an 8-channel analog output & DSP expander for the HAL1x (required for operation). Two RAD ports make it a 4-input, 12-output audio device — depending on which two RADs are connected. Thus, 32 daisy-chained EXP3x Expanders provide 256 discrete zone outputs maximum, including output compression, parametric EQ, two levels of paging and background music. Also, eight logic outputs and six DR remote ports are included. Therefore, 32 daisy-chained EXP3x Expanders would provide 64 RAD ports, 192 DR ports and 256 logic outputs. The dedicated DSP for each of the eight analog outputs offers two signal processing choices independently selectable per output. When you need background music, paging and emergency paging on an output, select the Zone Output processing set. This provides a Zone Processor block, and an Emergency Zone in addition to a Compressor and a 5-band parametric EQ with high- and low-cut filters. When Line Output is selected, the compressor and parametric EQ are available without the zone processing block and emergency paging blocks.
    DSPs (Digital Signal Processors)
MA-1616Dante-1
  • Magnetic

Magnetic – MA-1616Dante

ModeMA-1616Dante
Input Channels16
Output Channels16
Scenem anagement8 sets of pre -set scenes
Input channel featuresPre-amplification, signal generator, expander,compressor, automatic gain control, 5-section PE Q
Output channel features8-section PEQ, delayer, frequency divider, high - lowpass filter,lim iter
Sampling rate48kHz
Dynamic range from input tooutput>110dB
Phantom powerDC 48V
Input common-mode reject ion75dBu @ +20dBu,60Hz
Channel isolation105dB
Frequency response20~20kHz (±0.5dB )
Total harmonic distortion (THD+N )≤0.005% @1kHz,+4dBu
Max. input gain54dB
Input impedance2KΩbalance
Output impedance100 ohm
Max. output level20dBu
Power supplyAC 110V~230V AC, 50Hz /60 Hz
Working temperature0-40℃
    DSPs (Digital Signal Processors)
bose-controlspace-esp-1240ad|bose-controlspace-esp-1240ad
  • Bose Professional

Bose – ControlSpace ESP-1240AD

The Bose® ControlSpace® ESP-1240AD engineered sound processor is an open-architecture DSP with 12x4 fixed analog audio, built-in 8-channel ESPLink output and a rear-panel digital expansion slot offering IP-based network audio and control card options.  The Bose® ControlSpace® ESP-1240AD engineered sound processor is an open-architecture DSP with 12x4 fixed analog audio, built-in 8-channel ESPLink output and a rear-panel digital expansion slot offering IP-based network audio and control card options. This model meets today’s strict requirements for high-quality signal processing and control in a cost-effective package. The ESP-1240AD is designed for a wide variety of applications ranging from small self-contained projects to larger networked applications.
  • High-quality analog circuitry offers both mic and line-level I/O, operates with ultra-low noise and 115 dB dynamic range
  • Advanced digital signal processing supports audio at 48 kHz sample rate/24-bit, uses a floating-point open architecture DSP and operates at low latencies for sound system precision
  • Expansion card slot supports the use of accessory networking cards, allowing digital audio to be sent and/or received from other compatible products
  • 32x32 Dante audio networking
  • Bose® ControlSpace® Designer™ software enables a large set of signal processing modules, such as automatic mic mixing, multiband graphic and parametric EQs, Bose loudspeaker libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source selectors and delays
  • Front panel RJ-45 Ethernet connection enables localized configuration and monitoring, while enabling network passthrough when using a rear-panel network option card
  • Built-in Bose ESPLink output sends up to 8 channels of uncompressed digital audio to ESPLink-equipped Bose PowerMatch® amplifiers
  • A variety of control options – ControlSpace ESP products are compatible with the programmable Bose CC-64 and CC-16 controllers and three simplified zone volume interfaces, as well as potentiometers and switches built by other manufacturers
  • Integration with industry-standard control systems using a comprehensive serial protocol through onboard RS-232 and Ethernet ports
    DSPs (Digital Signal Processors)