Equipson - DD4

Equipson – DD4

Product Information

DD4 devices are gateways used to convert DANTE (Digital Audio Network Through Ethernet – developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

Lucky Tone – Dante Panel 2

Dante Panel series wall-mounted interface machines boast analog input and Dante digital input, analog line output and Dante digital output. The analog inputs support phantom power and manual preamp-gain adjustment. It is suitable for conference rooms and other professional applications. It available in black and white color.

I/O Interfaces

See the product

Glensound

Glensound – DARK8ADI

The Dark8ADI provides 8 line level analogue audio inputs and 4 x AES3 (8 audio channels) inputs to your Dante network. Like our other Dark units it has redundant network interfaces and redundant power supplies. The DARK8ADI (Analogue & Digital Input) is a very powerful Dante®/ AES67 network audio interface, in a robust 1RU 19" subrack It has a 8 off low noise analogue line inputs and 4 off transformer balanced AES3 digital audio inputs. These inputs are transmitted on a fully redundant Dante®/ AES67 network interface. In total 16 audio circuits are sent to the Dante®/ AES67 network. Eight of these circuits are always derived from the 4 x AES3 inputs, the other eight are automatically switched between the AES3 and analogue inputs. If the Dark8ADI detects valid AES3 signal on a channel then this will be routed to the network output, if no valid AES3 is detected then the analogue input will be routed to the network output instead of the AES3. The rugged design, redundant mains powering & redundant network facility of the unit means that it can easily be placed and left unattended wherever audio sources are required.

I/O Interfaces

Dante Ch: 0x16
24-bit

See the product

NTP – Penta 725 IP

PENTA 725 IP audio router is a 1024 x 1024 cross points TDM router matrix with 64 bi-directional channels over IP Ethernet powered by Dante, 64 AES3 I/O channels and 6 optical MADI and Double MADI interfaces housed in a 1U 19" chassis

I/O Interfaces

Dante Ch: 64x64

See the product

Equipson – DD4

Product Information

Similar Products

Lucky Tone – Dante Panel 2

Glensound – DARK8ADI

NTP – Penta 725 IP

Stay connected to Dante

Support

Company

Dante Networking Alliance