Product Information
Elytone’s POE-S2MB/SB an in-ceiling speaker system with Dante Ultimo embeded; The POE-S2MB/SB utilizes PoE (802.3bt) to generate maxmium 60 watt (peak) output.
Similar Products
- Magnetic
Magnetic – PK-828B+Dante
| Model: | PK-828B+Dante |
| LF Unit: | 8" x2 |
| HF Unit: | 1.4"x1 |
| Cabinet and paiting: | Plywood and water-based |
| Frequency Response: | 55Hz-18KHz(±3dB) |
| Nominal Impedance: | LF 4ohm,HF 8ohm |
| Input Sensitivity: | 106dB (1W/1m) |
| AES Power: | 700W LF,50W HF |
| Peak Power: | 1400W LF,100W HF |
| Max SPL: | 132dB |
| Input Connector: | 1xXLR female+1xXLR male1xVolume,1xpreset,USB,Dante |
| Amplifier @THD1%RMS: | 500Wx100W@4ohm |
| DSP: | 96KHz sample rate,fixed point DSPPhase,All past filter,12 EQ,Crossover,LimiterDriver free |
| Dante: | Yes |
| WIFI: | Ethernet by TCP/IP |
| Standby and Green energy: | Yes(<0.9W) |
| Working Voltage: | 85-265V,with PFC |
| Dimensions(WxDxH): | 280x335x693mm |
| Weight: | 22kg |
- Speakers
- DMIX
DMIX – CX108P
Speaker model: CX108P
Speaker type: 8”Active coaxial loudspeaker
Unit configuration: LF: 8" unit 2"(50mm）Voice coil
HF: 1.7"（44mm）Voice coil driver
Frequency response: 80Hz-20kHz(-10dB)
Rated power: LF: 140W， HF: 40W
Sensitivity: LF: 95dB， HF: 105dB
Sound pressure level： 121dB (peak)
Radiation Angle: 90°×90°
Crossover point: DSP control
Size (mm) : 344×270×256 (W×H×D)
Module amplifier power: HF：100W，LF：200W (Class D)
Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output
Module DSP control: RS485、USB or Dante
- Speakers
- Cadac
Cadac – CP124
The CP124 beam forming array module with internal passive crossovers between LF and HF way. It is intended as basic beamforming column loudspeaker for the CADAC product range. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The CP124 is a self-powered 2-way high-end beam forming array loudspeaker, which features 12 x 4" wideband woofers and 12 passive crossovers, for 36 x 1" dome tweeters. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 14 meters of acoustic length. Internally, one CP124 has 12 amplifier and 12 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.
- Speakers