Cart
← Back to Product Catalog

Dynacord – RCM-28

Dante Interface Cards

More details

Similar Products

dante-pcie-karte.html
  • Four Audio

Four Audio – Dante PCI Express Card

The Dante PCI e card Astoria connects the PC to a Dante network and allows resource-saving Dante IO over 128 inputs and 128 outputs with extremely low latencies.

Astoria supports 48 and 96 kHz with 128 inputs and outputs and 192 kHz with 64 inputs and outputs.

The PCI e card installs itself as a core audio device on the Mac or as an ASIO device on Windows.

Four Audio also provides a Linux ALSA driver.

The onboard processing on the card conserves the resources of the PC.

    Dante Interface Cards
See the product
musicrown-dl-series-io
  • Musicrown

Musicrown – DL Series

Musicrown's DL Dante Connect Box series is an I/O interface. Musicrown's DL Dante Connect Box series is an I/O interface.
  • High quality A/D(24-Bit), D/A(32-Bit) convert, 48KHz sampling rate.
  • DL2.2 is 2 channel balanced MIC/LINE XLR input, 2 channel balance XLR output.
  • DL2.0 is 2 channel balanced MIC/LINE XLR input.
  • DL0.2 is 2 channel balance XLR output.
  • Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 2IN/2OUT, using 24-bit precision and extremely low network latency.
  • Each input channel with independent signal light and gain control, also with +48V phantom power controlled by switch. Input channel 1 has high resistance switch select, support guitar, bass, keyboard musical instruments equipment input; input channel 2 extra with two group stereo input port (pair RCA input and one 3.5 socket), supporting media player, notebook computer and other equipments signal input.
  • Each output channel with independent signal light.
  • Dante can be used in the standard existing network interchanger, has highly interoperability: perfect cooperation with other start using Dante device.
  • Outer connect +12VDC power supply, Power switch independently controlled and power indicator light.
DL Series:
  • DL2.2 is 2 channel balanced MIC/LINE XLR input, 2 channel balance XLR output
  • ●  DL2.0 is 2 channel balanced MIC/LINE XLR input
  • ●  DL0.2 is 2 channel balance XLR output
    Dante Interface Cards
See the product
OPT-AoIP-iVAM_r
  • Wohler

Wohler – OPT-DANTE (iAM)

Enable monitoring from up to a 64ch Dante™ Input in iAM Series products.

Installing a Wohler unit with the Dante hardware option into an existing and functioning Dante network is virtually plug and play. The iAM Series rear panel AoIP jack supports 1Gb/s and 100Mb/s Ethernet devices in Dante Audio over IP network configurations. Channel source selections are made by choosing Input Type ‘AoIP’ in the Configuration-Configure Presets page regardless of which AoIP option is installed. The iAM-series unit is set up at the Wohler factory to be used as a slave rather than a master within the Dante network. Other devices or software, such as a Dante Controller, are expected to be responsible for most device configurations and all audio routing.

    Dante Interface Cards
  • Dante Ch: 64x0
  • AES67 Enabled
See the product