DVAE - DANTE 8i8o

DVAE – DANTE 8i8o

Product Information

DANTE 8i8o is an 8-in 8-out cobranet network audio interface machine. It follows the DANTE network audio standard to meet high-demand professional audio signal transmission. Supports 8-channel microphone/line analog audio input and 8-channel balanced analog signal output. Each input channel supports independent 48V phantom power supply and independent gain control. The open TCP/IP and RS232 control protocols allow third-party software to control the analog gain and 48V switch.

Specifications

Dante Ch: 8x8

WorkPro – DD2

DD2 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD2 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

I/O Interfaces

Dante Ch: 2x2
16-bit, 24-bit, 32-bit

See the product

Sonifex

AVN-DIO07

The AVN-DIO07 is a Dante to AES-3id digital input and output audio convertor in the Sonifex DIO range of Dante input/output devices. It features stereo AES-3id digital audio inputs and outputs on BNC connectors, and one Neutrik EtherCon® connector for direct connection to a Dante AoIP network.

I/O Interfaces

Dante Ch: 2x2
16-bit, 24-bit, 32-bit

See the product

Elytone

Elytone – EAN-DA8X8

Elytone's EAN-DA8X8 is a Dante-embedded preamp.

I/O Interfaces

See the product

DVAE – DANTE 8i8o

Product Information

Specifications

Similar Products

WorkPro – DD2

AVN-DIO07

Elytone – EAN-DA8X8

Stay connected to Dante

Support

Company

Dante Networking Alliance