Cart
← Back to Product Catalog

DMIX – MLA 210a

Speakers

More details

Similar Products

soundtube-IPD4-CM62-BGM_1200px|soundtube-IPD4-CM62-BGM_1200px
  • SoundTube

SoundTube – IPD4-CM62-BGM

The IPD4-CM62-BGM is a 6.5-inch in-ceiling Dante speaker with connection and power for up to three additional non-Dante SoundTube speakers. The IPD4-CM62-BGM gives integrators an economical way to expand in-ceiling speaker zones on a Dante network. This speaker incorporates a 6.5-inch (165 mm) polypropylene woofer with rubber surround and 1-inch (25 mm) silk dome tweeter in a ported steel backcan. In addition to its PoE connection to the SoundTube STNet Switch, the IPD4-CM62-BGM can power up to three additional non-IP speakers. Each IPD4 speaker can be broken down into 2 channels; IPD4 speakers are matched in a system with standard passive SoundTube speakers of the same type. All IPD4 speakers come in both an active and a passive version. As with SoundTube's other IPD in-ceiling speakers, IPD4 speakers feature BroadBeam Ring technology for broad, even dispersion of high frequencies and include SoundTube's exclusive SpeedWing quick-mounting technology.
    Speakers
See the product
CA-404DA
  • DMIX

DMIX – CA-404DA

Technical parameters：

Speaker model: CA-404DA

Speaker type: Active Speaker

Unit composition: 4×4" Full frequency unit

Frequency response: 100Hz-17kHz （-10dB）

Sensitivity: 94dB

Rated impedance: 8Ω

Sound pressure level: 124dB（peak）

Rated power: 120W

Horizontal coverage Angle: 100°x30°-40°，Electronic control

    Speakers
See the product
VEXO112-B-W
  • AUDAC

AUDAC – VEXO112A

The VEXO series are compact high performance 2-way active loudspeakers and come in 3 different models, each of them with different sizes and performances meeting the requirements of every application. The VEXO series loudspeakers consist of active and passive versions. The low-frequency transducer, which is made out of high-quality materials, is combined with a 1.7” voice coil compression driver, enabling high sound pressure levels and a tight driver response with a rotatable 90° x 70° coverage pattern for a wide range of applications. Thanks to the unique driver composition, the VEXO112 delivers a clear and natural sound with an RMS power of 400 Watts and a maximum power of 1600 Watt. The frequency response (±3dB) starts from 58Hz up to 20 kHz and the sensitivity (1W/1m) reaches 99 dB while a maximum continuous sound pressure level from 125 dB can be achieved
    Speakers
See the product