Cart
← Back to Product Catalog

DIO0808MA-XLR

I/O Interfaces

More Details

Similar Products

fp-nml2vp_400px
  • RDL

RDL – FP-NML2VP

The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. The FP-NML2 is ideal for adapting standard audio amplifiers to a Dante network. Model FP-NML2VP operates from PoE. The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. Separate remote controls may be used for each output, or a single remote control may be connected to adjust both outputs simultaneously. VCA control uses industry standard 0 to 10 Volts compatible with a range of RDL passive and multi-point rotary-encoder remote controls. The FP-NML2V is ideal for adapting standard audio amplifiers to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS with crosstalk below the noise floor. The FP-NML2V operates from 24 Vdc and is available in a PoE version: FP-NML2VP. If powered by 24 Vdc and PoE, the FP-NML2VP seamlessly switches over to PoE power upon loss of the external 24 V supply.
    I/O Interfaces
See the product
  • Blustream

Blustream – IP250UHD-TX

The UHD Multicast distribution platform allows virtually latency free (1 frame) distribution of 4K HDMI video over a 1Gb Managed Network. Compatible with the current IP200 platform, the IP250UHD-TX is an industry leading 4K HDCP 2.2 HDMI transmitter that, using visually lossless compression technology, delivers 10Gb HDMI, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture, or greater distances using the in-built fibre SFP port. The IP250UHD-TX features dual RJ45 network ports for independent or combined HDMI and/or Dante signal distribution. The unit can be powered via PoE from the network switch, or locally should the switch not support PoE. With multiple configuration options available, the Multicast solution is ideal for both commercial and residential installations.
    I/O Interfaces
  • Dante Ch: 2x2
  • Dante AV Enabled
See the product
QRack_Dante_Back_Angle_0004
  • DiGiCo

DiGiCo – DQ-Rack

The DQ-Rack provides all of the power of our larger racks, but in a more compact unit, and harnessing the flexibility of Audinate’s Dante protocol.

The compact 6U rack sports 48 mic inputs and up to 24 line outputs. Clever audio design allows the last 4 outputs to be switched between line outputs and stereo AES/EBU outputs, adding up to a maximum of 8 AES/EBU output channels.

Making use of Dante means that existing infrastructure can be used for flexible and familiar installation. Plus, connection to a DiGiCo console via the DMI-DANTE64@96 means all inputs and outputs on the racks can be accessed at both 48kHz and 96kHz.

To ensure ultimate reliability the DQ-Rack is equipped with dual redundant power supplies as standard.

    I/O Interfaces
  • Dante Ch: 64x64
  • 48kHz-96kHz
See the product