Cart
← Back to Product Catalog

David Clark – U9101

Intercoms

More details

Similar Products

clear-com-eclipse-hx-delta_600px|clear-com-eclipse-hx-delta_600px
  • Clear-Com

Clear-Com – Eclipse HX-Delta

The Eclipse HX-Delta is a three rack unit (3RU) matrix intercom system frame provided with 2 Central Processing Unit (CPU) cards and 2 external power supplies.  The Eclipse HX-Delta is a three rack unit (3RU) matrix intercom system frame provided with 2 Central Processing Unit (CPU) cards and 2 external power supplies. The frame has slots for 4 I/O interface cards and 3 interface modules. This compact matrix frame offers the potential to connect users over dedicated CAT5, IP infrastructures (LAN, WAN and Internet), The Eclipse HX-Delta is a three rack unit (3RU) matrix intercom system frame provided with two Central Processing Unit (CPU) cards and two external power supplies. The frame has slots for four I/O interface cards and three interface modules. This compact matrix frame offers the potential to connect users over dedicated CAT5, IP infrastructures (LAN, WAN and Internet), Fiber networks and integrate wireless beltpacks. The HX-Delta can also interface with external sources including 4-wire audio, partylines, telephone lines and MADI, all of which can be seamlessly routed to user key panels or beltpacks. Up to 64 Eclipse HX matrices can be connected to form a single networked installation. Eclipse HX-Delta Features:
  • Compact 3RU system frame with slots for two CPU cards, four interface cards and three interface modules
  • Up to 256 internal ports
  • Dual external PSU for redundancy; dual cooling fans
  • Alarms for frame temperature, external PCU failure, and fan failure
  • Front to rear LAN / Panel patch
  • Networking/Linking options include 4-wire, Fiber, IP, MADI, E1/T1, GPIO, DANTE and AES67
  • Seamless integration with FreeSpeak II Wireless Intercom and IP Communication Panels
    Intercoms
See the product
ctp-systems-FWD6006s|ctp-systems-FWD6006s
  • CTP Systems

CTP Systems – FWD6006

The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. Each channel has a cut switch, a ifb monitor button plus a vox incoming audio present indicator. Press the talk keys down for momentary operation and up to latch. The latch operation can be defeated if required. Units can be supplied with a headphone jack or a 5 pin XLR headset connector. There is also a microphone cut button. When a talk key is pressed incoming audio to the loudspeaker is normally dimmed to prevent feedback, the level may be adjusted or defeated as required. The FWD6006 has a secondary ethernet interface which may be used a switch output or for network redundancy. Mains requirement is 110-240VAC 50/60Hz. Dimensions: 100mm high, 180mm deep, 200mm wide.
    Intercoms
See the product
large-FSEdge_Beauty_Base_Front_Straight
  • Clear-Com

Clear-Com – FreeSpeak Edge Base Station

The FreeSpeak Edge base station is a standalone 1RU device that provides extensive connectivity to a wide range of Clear-Com endpoints along with third-party Dante devices. Built primarily to deploy digital audio connections and IP transceivers, the base station also provides support to FreeSpeak II and Edge beltpacks, 1.9 GHz E1 and IP transceivers*, and 2.4 GHz E1 transceivers.

    Intercoms
See the product