Danacoid - DA-PSW8A

Danacoid – DA-PSW8A

Product Information

Features

• Adds PoE-powered and Dante-enabled devices to a 10/100/1000Mbps Ethernet network.

• Supports IEEE 802.3 (10BASE5), IEEE 802.3u (100BASE-TX), IEEE 802.3z (1000BASE-X), IEEE 802.3ab (1000BASE-T), and IEEE 802.3x (Flow

Control).

• Features 8 Ethernet RJ-45 ports.

• Includes 1 Ethernet RJ-45 port and 1 Ethernet SFP port.

• Powers PoE-enabled devices by IEEE 802.3af (PoE), IEEE 802.3at (PoE+) or IEEE 802.3bt (4PPoE).

• Provides 60 watts (IEEE 802.3bt) of power per port or a total of 450 watts.

Stage Tec – NEXUS Base Devices

The NEXUS system is an audio network, a router, and an I/O matrix that also offers the following:

Audio-format conversion
A/D and D/A converter systems
Audio processing
Data forwarding
Routing interfaces
Multi-channel metering
Power-amplifier control
Intercom
Logical functions, and much more

NEXUS Base Devices are compact 19" mainframes for static or mobile use. 1 U, 3 U, 6 U, 9 U, 12 U, and 15 U versions are available. Input and output ports are on 3 U slide-in boards. NEXUS Base Devices are based on a 4 HP grid and accommodate modular boards such as I/O boards for analogue and digital audio, DSP boards for audio processing, special routing boards for data or switching signals and fibre-optic interface boards for interconnecting Base Devices. The NEXUS system integrates with Dante using the Stage Tec NEXUS XDIP interface card.

Audio Routing Matrix Switches

See the product

Extron Electronics

DTP3 CrossPoint 622

4K/60 Presentation Matrix Switcher Configurable from 6x4 to 8x2 Key Features

All‑in‑one configurable 4K/60 matrix switcher, scaler, audio DSP with AEC, audio power amplifier, and control processor
Integrated DTP3 inputs and outputs support transmission of uncompressed video, audio, power, and control up to 330' (100 m) over a shielded CAT 6A cable
Supports video resolutions up to 4K/60 with 4:4:4 color sampling
Dante® audio networking with Dante Domain Manager and AES67 support provides a wide range of expansion capabilities
Available with energy efficient Class D amplifier with selectable output power modes:Two 100 watt channels into 4 or 8 ohms
One 200 watt bridged channel into 8 ohms
One 200 watt 70 V or 100 V channel
Integrated ShareLink Pro Wireless Presentation System on select models

Audio Routing Matrix Switches

Dante Ch: 32x32
24-bit

See the product

Kingray

Kingray – MAP0808M-D4

MAP0808M-D4 is equipped with 8 analog inputs and 8 analog outputs, of which 4 input and output channels can be switched to Dante network audio input and output. DSP chip based on ADI 300MIPS processing rate to meet daily processing functions. Equipped with exclusive upper computer software , which can switch various inputs and change inputs, phantom power, etc. through the software. At the same time, software can adjust conventional parameters such as gain, noise gate, delay, phase, mute, and equalizer. Supports full matrix mixing mode, any input can be connected or mixed to any output at any ratio. Through USB-HDI eliminating connector or serial connection control in the control, all the parameters can be adjusted in real-time.

Audio Routing Matrix Switches

See the product

Danacoid – DA-PSW8A

Product Information

Similar Products

Stage Tec – NEXUS Base Devices

DTP3 CrossPoint 622

Kingray – MAP0808M-D4

Stay connected to Dante

Support

Company

Dante Networking Alliance