Cart
← Back to Product Catalog

CS704D-ADSP

Amplifiers

More details

Similar Products

AVS-906EX
  • Seikaku

Seikaku – AVS-960EX

1. The max power can reach 360W and output via 6 zone.
2. Three-way MIC/LINE input with phantom power and one BGM input
3. Six-way controllable 24V power supply output controls.
4. Backup power DC24 input connector.
5. Build in 16M flash. For store alarm audio message or normal audio message.
6. Automatically alarm audio message or normal audio message broadcast is available via GPIO control input.
7. Two-way emergency control input and six normal control input.
9. DANTE network interface.
10. Automatically fault detected: speaker Line/ Control input connection / device local fault etc.
11. Relevant functions are compliant with Chinese fire regulations.

    Amplifiers
See the product
atlasied-t112|atlasied-t112
  • AtlasIED

AtlasIED – T112

The AtlasIED TitanONE T112 Smart Mainframe Power Amplifier provides the latest signal automation, processing and amplification technologies in one modular solution. The AtlasIED TitanONE T112 Smart Mainframe Power Amplifier provides the latest signal automation, processing and amplification technologies in one modular solution. The modular design allows up to seven (7) TitanONE Series power amplifier cards (sold separately) to be easily inserted into the mainframe. This offers twelve-(12) main channels of amplification and two-(2) backup channels for redundancy. Each channel has a complete library of DSP filter options. Mainframe can also be used to provide power, house and configure via software dual channel line output cards T2LD-120V-T1 two-channel line driver or T2LD-230V-T1 two-channel line driver to drive external systems, or to provide processing for self-powered loudspeaker arrays.The TitanONE T112 is networkable offeringAtlasIEDNet+ IP-based system control and digital audio transport via Dante™. TitanONE T112 integratesAtlasIED’s world-renowned SystemAssured™ Supervision for entire system monitoring and fault detection to ensure worry-free 24/7 operation. The TitanONE T112 doesn’t stop there, it also incorporates AtlasIED’s patented smart technology called AlwaysHEAR™. This ensures the audio levels are automatically adjusted to always be set at the perfect sound level. The TitanONE T112 offers over eight technologies in a single compact form factor and is the perfect solution for life safety systems and everyday installations.The T112 meets the stringent standard requirements for life safety and mass notification systems. It is recognized by UL and it can easily be incorporated into any fire or life safety system. The T112 also has the ability to enter Power-Save Mode via contact closure or over the network. In this mode, all the power amplifiers are switched off unless needed for an emergency message. This is useful to save on battery or backup power supply drain when main power is lost for example.
    Amplifiers
See the product
FLX80-4-70V
  • Stewart Audio

Stewart Audio – FLX80-4-CV-D

4 Channel DSP-Enabled Amplifier 4 x 80W @ 70/100V Dante™ Network Enabled The FLX-E-80-4-CV-D is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-80-4-CV-D amplifier supports Dante™ audio.
  • Onboard DSP for signal routing and filtering
  • Ethernet configuration, control & reporting
  • Pre-mix level control
  • 4 analog inputs (4 line/mic; 2 w/ phantom power)
  • 4×4 Break in/Break out Dante™ channels
    Amplifiers
See the product