Cart
← Back to Product Catalog

CS702D-ADSP

Amplifiers

More details

Similar Products
  • Biamp

Voltera – D-1200-4M

Audio DSP and Amplified Loudspeaker Controller - 4 Channels sharing 1200W with Dante & AVB. Key Features
  • Powerful onboard DSP with ample headroom for large systems – the equivalent of a TesiraFORTÉ for Tesira custom processing and hosting of expanders
  • 4 class D channels sharing 1200 watts
  • Power sharing provides up to 75% of total power or 900 W through any single channel
  • High peak voltage output capability: 145 Vpk
  • Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
  • Each model supports AVB, Dante, and AES67
  • Accurate raised cosine EQ for the entire frequency band
  • Group-controlled raised cosine EQ making it attractive for tuning large systems
  • Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
  • Processor can be sustained through POE – no main power required and no reboots
  • Support for failover-to-analog from networked audio input operation
  • 5-year warranty
  • Compliant with the US Trade Agreement Act (TAA)
  • Biamp Workplace Ready
    Amplifiers
See the product
Q6000i
  • DMIX

DMIX – Q6000i

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q6000i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 4×1500W

4 Ω power: 4×2500W

2 Ω power: 2×2500W

Analog audio signal: Maximum input level +18dB

Digital Audio signal: 24/20 bit 48KHz

Corresponding frequency (20-20khz) : + -1dB

THD + N: <0.5%

Dynamic range: 120dB

Ambient humidity: <90%

Damping coefficient: >200

Signal to noise ratio: >105dB

    Amplifiers
See the product
mansion-PLA2DI_600px
  • Mansion

Mansion – PLA2DI

PLA2DI power amplifier provides 120W output power per channel into 4Ω and 8Ω, the amplifier can also be bridged to supply up to 240W output power into 70V or 100V. PLA2DI power amplifier provides 120W output power per channel into 4Ω and 8Ω, the amplifier can also be bridged to supply up to 240W output power into 70V or 100V. Designed in Class D amplification with the slot card of Dante interface, accepts the Audio signal from the Dante network. With the compact housing, PLA2DI provides the excellent sound and reliable quality for many install projects. Features
  • Two Channels Model – 120W RMS
  • Stereo into 4-8 Ohm loads
  • Bridged mode 240W output for 70V or 100V (Direct Drive)
  • Power down after ~15 minutes of no signal and comply with Energy Star Power consumption limits of < 0.5W in standby
  • Yellow LED (Front Panel) to indicated Standby mode is active
  • Terminal Block analog audio inputs
  • Selection for Power-Up mode
  • Switch for High Pass Filter
  • Natural cooling without Fan
  • TRIGGER could be external remoting ON/OFF
  • Short circuit protection
  • Overheating protection
    Amplifiers
See the product