Product Information
16×16 Dante 16 channel input 16 channel output option license for the 9904-UDX openGear card.
Similar Products
- Yamaha
Yamaha – HY144-D-SRC
The HY144-D-SRC audio interface card supports the Dante audio network protocol, handling up to 144 input and 144 output channels of 96 kHz/32-bit digital audio.
The HY144-D-SRC audio interface card supports the Dante audio network protocol, handling up to 144 input and 144 output channels of 96 kHz/32-bit digital audio. Onboard sample rate conversion allows interconnection between devices operating at different sampling rates. Five operational modes can be selected via firmware.
- Transmits and receives up to 144 input and 144 output channels of uncompressed 96 kHz/32-bit digital audio.
- Primary and secondary connectors support redundant connections. Daisy chain connections also supported.
- Five firmware-selectable operating modes: 144io (SRC off, 144 in/144 out), 144io SyncSRC (SRC on, synchronous, 144 in/144 out), 72io AsyncSRC (SRC on, asynchronous, 72 in/72 out), 144in AsyncSRC (SRC on, asynchronous, 144 in/0 out), 144o AsyncSRC (SRC on, asynchronous, 0 in/144 out).
- Dimensions (W x H x D): 125 x 37 x 207mm (4.9" x 1.5" x 8.2")
- Net Weight: 0.25 kg (0.6 lbs)
- Dante Interface Cards
- Dante Ch: 144x144
- 24-bit, 32-bit
- Allen & Heath
Allen & Heath – Dante 64×64
The Dante 64x64 card offers low latency, high channel count connectivity between dLive systems and Dante networks and devices. With 64 channels of bidirectional audio at 96kHz, the card allows high channel digital splits between systems whilst offering simultaneous multitrack recording via Dante Virtual Soundcard.The front panel Primary and Secondary ports allow simultaneous connection to multiple Dante devices, or dual-cable redundancy with compatible hardware. A dedicated Control Network port is provided for configuration using Dante Controller software.Features
- Dante Interface Cards
- Dante Ch: 64x64
- 24-bit
- Sennheiser
Sennheiser – EM 9046 DAN option card
The Sennheiser Dante™ card for the EM 9046 receiver enables its top-of-the-range Digital 9000 microphone system to be integrated into Dante audio-over-IP networks.
The EM 9046 DAN extension card inserts into the EM 9046 eight-channel receiver expansion slot. Sixteen audio inputs can send both digital audio and command signals over the Dante network using the card. Two Gbit RJ45 sockets are provided that serve to establish two redundant network circuits or daisy-chain the signals. Sampling rates of 44.1/48/88.2 and 96 kHz at a resolution of 24 bits are possible with the card.
Download firmware for Digital 9000 Microphone System to support Sennheiser EM 9046 DAN Dante option card
- Dante Interface Cards
- Dante Ch: 16x0
- 24-bit