Cart
← Back to Product Catalog

Cobalt C-10 Fully Featured FM Transmitter

Amplifiers

More Details

Similar Products

ashly-nXe-4004_600px
  • Ashly Audio

Ashly – nXe4004bd

The nXe4004bd unit is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
See the product
Cobalt C-10I Fully Featured Industrial FM Transmitter
  • Aqua Broadcast

Cobalt C-10I Fully Featured Industrial FM Transmitter

The COBALT C-10 is a robust 10W FM Broadcast Transmitter, boasting FCC part 73 LPFM and IC certifications. Its exceptional audio quality and clear sound from the Direct to Channel Digital technology with minimal manipulation, maintains audio integrity.
    Amplifiers
See the product
FLX160-2-70V|FLX160-2-70V
  • Stewart Audio

Stewart Audio – FLX-E-160-2-CV-D

2 Channel DSP-Enabled Amplifier 2 x 160W @ 70/100V The FLX160-2-CV is a 2 channel, 70V/100V Network Enabled 1/2 rack amplifier delivering 160W per channel with built in DSP, RS232 control and Remote volume control.
  • Onboard DSP for signal routing, filtering, and bridging
  • USB and RS232 available for configuration
  • 1/2 rack package
  • Remote Volume Control
  • Signal Sense Technology
  • Made in the USA
    Amplifiers
See the product