Cart
← Back to Product Catalog

Calrec – RP1

I/O Interfaces

More details

Similar Products

fp-nml2vp_400px
  • RDL

RDL – FP-NML2VP

The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. The FP-NML2 is ideal for adapting standard audio amplifiers to a Dante network. Model FP-NML2VP operates from PoE. The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. Separate remote controls may be used for each output, or a single remote control may be connected to adjust both outputs simultaneously. VCA control uses industry standard 0 to 10 Volts compatible with a range of RDL passive and multi-point rotary-encoder remote controls. The FP-NML2V is ideal for adapting standard audio amplifiers to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS with crosstalk below the noise floor. The FP-NML2V operates from 24 Vdc and is available in a PoE version: FP-NML2VP. If powered by 24 Vdc and PoE, the FP-NML2VP seamlessly switches over to PoE power upon loss of the external 24 V supply.
    I/O Interfaces
See the product
dbs1
  • Four Audio

Four Audio – DBS1

This small 2 channel IO box based on the new Dante Ultimo solution is a cost effective but high quality solution for getting analog signals into or out from a Dante audio network without much infrastructure. It’s small and can be placed under the desk, onto a wall.
    I/O Interfaces
See the product
RedNet_A16R_MkII_front_HR
  • Focusrite

Focusrite – RedNet A16R MkII

RedNet A16R MkII is a 16-channel analogue Interface for Dante networks, with two channels of AES3 I/O. Individual input and output channel level controls allow for precise adjustment of all I/O levels using RedNet Control. With two power supplies and primary and secondary etherCON network connectors, RedNet A16R MkII is perfect for critical-path applications in recording, post-production, live sound and broadcast. Built-in redundancy features allow for silent fail-over in the event of power or network outage, providing reassurance for system technicians.

Analogue inputs and outputs are connected through four rear-panel AES59-configured DB25 connectors, while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. The XLR input can accept DARS signals in addition to AES3. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A16R MkII, or alternatively allows RedNet A16R MkII to act as a network clock grand master, synchronised to external input. RedNet A16R MkII is well suited to permanent installation and repeated strike and setup: all connectors lock and remain terminated even under stress, providing worry-free installation and peace of mind once situated in a rack. In addition, all Focusrite Pro products come with a three-year warranty and award-winning customer support.

    I/O Interfaces
  • Dante Ch: 18x18
  • 24-bit
See the product