Burl – B2 Bomber ADC


More details

Similar Products

audix-DN43
  • Audix

Audix – DN43

The DN43 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost.

The DN43 features one microphone input specifically designed for the Audix M3 tri-element microphone and one input for Audix RJ45-equipped, single-element microphones. It has two 5V logic outputs per port, with source/sink capability for LEDs that are controlled by network-connected DSPs. Low-pass and high-pass filter settings are available on each audio channel, as are eight selectable gain levels, with all settings configurable via software.

Audio Features

  • High-fidelity 24-bit, 48kHz audio
  • Balanced audio inputs with RFI filtering
  • 48V phantom power output
  • Each channel has selectable pre-amp gain, as well as low- and high-pass fi lters
  • All channels controlled independently
  • Flash memory prevents loss of settings in the event of power loss
  • Compatible with the M3 tri-element microphone (DN43 only), the flush-mount,
  • steerable M70WD ceiling microphone, and the M55WD ceiling microphone

Dante Features

  • Supports AES67 audio streams
  • Dante Domain Manager (DDM) ready
  • Dynamic or static IP address
  • Evaluated to the requirement of UL2043
  • and is suitable for use in above-ceiling
  • applications

Power Features

  • Operates on PoE from any IEEE 802.3af compliant equipment
    I/O Interfaces
digigram-AUDIOWAY-bridge-B3_1200px_0
  • Digigram

Digigram – Audioway Bridge B2

The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio. The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio.
  • Stainless steel 1U chassis power consumption <50 W
  • Front panel control interface for rapid overview of current status
  • Dual AC/DC power supply 4 configurable GPIOs Wordclock synchronisation 24-bit audio routing: 44.1 kHz to 96 kHz
  • AES67/Dante interface: 64-in/64-out EtherCON connector AoIP stream redundancy Integrated 4-port switch
  • MADI interface: 1 x optical 64-in/64-out connector 1 x BNC 64-in/64-out connector
    I/O Interfaces
  • NewHank

DConXi

The DCon series features three advanced products, all designed to fit standard European in-wall junction boxes with a depth of 50mm and compatible with widely used EU cover frames, making them perfect for seamless integration into commercial, educational, and entertainment AV environments. This two-channel XLR input panel converts analog audio to Dante, the industry-standard audio-over-IP protocol. Each input is equipped with an adjustable preamp that offers up to 42dB of amplification plus -100 to +27dB digital gain, along with switchable Phantom Power for handling microphones and other audio sources with precision. DConXi also provides an API for integration with third-party control systems, making it an ideal choice for customized installations.
    I/O Interfaces
  • Dante Ch: 2 In
  • AES67 Enabled