BARE – D-10


More details

Similar Products

rdl-dds-bn22_1200px|rdl-dds-bn22_1200px
  • RDL

RDL – DDS-BN22

The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN22 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN22’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
  • Turtle AV

Dante 2CH Analog Line Input Adapter

Dante 2CH Analog Line Input Adapter with Gain Controls.
  • Two-channel analog audio to Dante 2CH digital audio
  • Balanced/unbalanced analog audio input
  • Dante audio sampling rate supports 44.1/48/88.2/96KHz@24bit
  • Configurable Dante audio delay with support for 1, 2, or 5 milliseconds
  • Analog audio input with support for 5-level gain adjustment
  • PoE and USB-C power options
  • TAA compliant
  • Made from 90% recycled plastic, including 5% Ocean Bound Plastic
    I/O Interfaces
  • Dante Ch: 0x2
  • 16-bit, 24-bit
visionary-solutions-d250l_500px|visionary-solutions-d250l_500px
  • Visionary Solutions

Visionary Solutions – D250L

2 output balanced line level Dante™ interface.  2 XLR male, 1 RJ45, PoE. 2 output balanced line level Dante™ interface.  2 XLR male, 1 RJ45, PoE.
  • 2 Channels of balanced audio output from Dante™ networks.
  • Professional Line Levels.
  • Power Over Ethernet
  • Configure with Dante™ Controller, no other software required
Distributed exclusively in the U.S. by BTX Technologies.
    I/O Interfaces