Cart
← Back to Product Catalog

Blustream – IP250UHD-TX

I/O Interfaces

Learn more

Similar Products

Burl_B2_ADC_Dante_Front|Burl_B2_ADC_Dante_Front
  • Burl Audio

Burl – B2 Bomber ADC

The B2 Bomber analog to digital converter is designed to give you the ultimate in recording tone. BURL Audio designed an analog audio path that is complimentary to your mic pre and to the analog to digital process. By using a revolutionary hybrid circuit with a proprietary transformer, the BURL AUDIO BX1, and a discrete class-A, zero feedback, zero capacitor signal path, we have achieved dynamic and tonal balance. Features:
  • 44.1k Hz to 192k Hz, 24 bit, 2 channel ADC
  • Proprietary, high definition, BURL Audio BX1 transformer input
  • All class A, discrete transistors signal path with zero feedback, zero caps
  • Audiophile quality 6 position attenuator with standard headroom settings
  • High definition metering with simultaneous RMS and peak indication
  • Dante, 2 AES, SPDIF and Toslink output
  • BNC word clock input with two outputs of extremely low jitter clock
  • Frequency response at 48kHz sample rate is 12Hz to 22kHz, +/- 0.1dB
  • Frequency response at 96kHz sample rate is 15Hz to 46kHz, +/- 0.1dB
  • Frequency response at 192kHz sample rate is 18Hz to 94kHz, +/- 0.1dB
  • 120dB Dynamic Range (A- weighted), 117dB (no weighting)
  • -100dB THD+N (+4dBU = -15dBFs)
  • -94 dB THD+N (+18dBU = -1dBFs)
  • Rugged, Made in USA design
    I/O Interfaces
See the product
  • Studio Technologies

Model 5682

The Model 5682 units are a specialized interface that allows two independent audio-over-Ethernet networks to be interconnected. One network supports the applicable SMPTE® ST 2110 standards while the other network supports Dante®. Two versions are available. The Model 5682-01 allows linking (in each direction) of up to 32 ST 2110-30 audio channels (at 48 kHz sample rate) with 32 Dante channels (at 44.1 or 48 kHz sample rate) or 16 Dante channels (at 88.2 or 96 kHz sample rate). The Model 5682-02 allows linking (in each direction) of up to 64 ST 2110-30 audio channels (at 48 kHz sample rate) with 64 Dante channels (at 44.1 or 48 kHz sample rate) or 32 Dante channels (at 88.2 or 96 kHz sample rate). The Dante interfaces support AES67 and the Dante Domain Manager™ application. Each unit mounts in one space (1U) of a 19-inch rack and is powered by 100-240 V, 50/60 Hz. Units can also be powered by an external source of 12 Vdc.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product
joseph-electronics-dft-exp_1200px|joseph-electronics-dft-exp_1200px
  • Joseph Electronics

Joseph Electronics – DFT-EXP

The new DFT-EXP Series from Joseph Electronics provides for up to 12 channels of 3G/HD/SDI uncompressed video plus four additional slots that can be fitted with a selection of other convenient modules for audio, intercom, analog video, genlock, MADI, and even Dante. The new DFT-EXP Series from Joseph Electronics provides for up to 12 channels of 3G/HD/SDI uncompressed video plus four additional slots that can be fitted with a selection of other convenient modules for audio, intercom, analog video, genlock, MADI, and even Dante. All of this is transported on one or two singlemode fibers, depends on configuration) and can also be operated with optical redundancy. Housed in a compact 2RU fanless enclosure with redundant power supplies, up to six 2-channel modules can be fitted for signal counts from 4 to 12. The direction of each module is field reconfigurable to take care of last minute changes. Transmit modules are red and receive modules are blue. Red modules (TX) are slot specific and clearly labeled. The Blue modules (RX) are generic and can go in any slot.  Modules support SMPTE 424, SMPTE 292, SMPTE 259, SMPTE 297 and DVB-ASI. Units can be set to operate in non-reclocking mode to handle any signal from 50Mb/s all the way up to 3Gb/s. A Joseph’s exclusive is the Bypass Channel. This innovative feature allows you to add even more analog video, audio, or data. Units can be custom configured with fiber connections on the front or rear of the enclosure. Convenient LEDs indicate signal presence and link status. Trust Joseph Electronics to come up with innovative and flexible fiber transport solutions that allow broadcasters to make those last-minute changes quickly and easily.  The DFT-EXP Series is ideal for anyone who needs to move a variety of signals point-to-point. Whether for announce booths, host positions, stand-up postions, edit suites, or cross-campus feeds, The DFT-EXP takes advantage of the high bandwidth and dramatic weight savings offered by fiber to deliver pristine video signals and clean audio over far greater distances than copper. Custom features such as the placement of the fiber connectors; audio, Ethernet, data, and  intercom connectivity; optical redundancy; 1 or 2 fiber operation; and the By-Pass channel, ensure that customers get exactly wht they need and don’t pay for features that they don’t want or will never use. The ability to reconfigure your signals on-the-go has gone from being a convenience to being an absolute necessity. With nothing more than a basic screwdriver, users can quickly and easily make the last minute changes the inevitably come up on remote broadcasts.
    I/O Interfaces
See the product