Cart
← Back to Product Catalog

BARE – TNT-1616D

I/O Interfaces

More details

Similar Products

worldcast-apt-aoip-multi-channel-codec
  • WorldCast

WorldCast – APT AoIP / MPXoIP MULTI-CHANNEL CODEC

The APT MULTI-CHANNEL CODEC is a compact and efficient solution for the transport of multiple channels of audio or MPX content over IP links. It can support up to 16 channels of audio within a single unit of rackspace - and even more IP streams when using multicast or multiple unicast technology. The APT MULTI-CHANNEL CODEC is a compact and efficient solution for the transport of multiple channels of audio or MPX content over IP links. It can support up to 16 channels of audio within a single unit of rackspace - and even more IP streams when using multicast or multiple unicast technology. A Dante Interface module enables direct connection to Dante or AES 67 networks. The 1RU frame can accommodate up to 4 AoIP modules, each equivalent to a stand-alone stereo duplex codec combining audio, dual IP transport and auxiliary data on board. It offers the entire range of audio formats and modes meeting the audio industry’s requirements: simplex, duplex, AES/EBU, AES/EBU with analog backup, analog with HI/LO or 600Ω impedance.
    I/O Interfaces
  • AES67 Enabled
See the product
yamaha-swr2100p_10g_1200px|yamaha-swr2100p_10g_1200px
  • Yamaha

Yamaha – SWR2100P-10G

Complex network switch setup that was previously better left to an IT technician can now be easily accomplished by anyone. A simple switch setting is all it takes to optimize SWP1 series network switches for Dante operation, and a dedicated Windows application provides “network visibility” for comprehensive monitoring and control. Yamaha has used its knowledge of both IT and pro audio to provide "SWR2100P series" simple L2 switch that has been optimized for networked audio installations. The switch can take advantage of "Yamaha LAN Monitor" a dedicated Windows application that provides 'network visibility' for comprehensive monitoring and control. The "SWR2100P series” which are simple L2 switches can supply power as well as audio and control signals to a PoE-compliant Dante device such as the paging station microphone “PGM1” through just one Ethernet cable. Since the power supply and the network wiring can be combined, the number of cables being used can be reduced, and the connection distance can be extended, so the degree of freedom of Dante device installation is increased and construction flexibility is further improved. Systems built around the SWR2100P-5G or SWR2100P-10G L2 switches allow comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability. Understanding how multiple switches installed in different locations are connected, plus how network devices are connected to those switches, can be a difficult, time-consuming task. The Yamaha LAN Monitor makes overall network topology clearly visible, giving the user a comprehensive overview of how multiple switches and Dante network devices are interconnected. Simply connect a Windows PC to the nearest SWR2100P series switch and launch the Yamaha LAN Monitor software. You can take a “snapshot” of the network status when set up as required. The software can then automatically keep track of the settings and alert you to any changes. You could take a snapshot of the network, and then you would be alerted if a cable is disconnected, if a device is turned off, or if a wrong connection is made prior to the performance, for example. Identifying devices connected to a switch by only their IP or MAC address is a difficult and error-prone approach. Connected Dante devices are identified by a Dante icon as well as a device ID previously set up via the Dante Controller software. You can also enter additional info, such as the location of the device, in the Label and Comment fields. If the monitoring device does not respond to a Ping, it judges that a fault has occurred and automatically stops the PoE power supply to that device and then resumes it. This restarts the monitoring equipment and attempts recovery. By collectively managing the status of the devices distributed over a wide area, it can ensure that equipment management can operate far more smoothly.
    I/O Interfaces
See the product
QuicklinkTX (1)
  • Quicklink

Quicklink – TX DUO

The Quicklink TX Duo allows you to manage two simultaneous Skype calls to be processed as 2 SDI/NDI outputs. The TX Duo enables you to access 300 million Skype users for inclusion for remote interviews within live broadcasts, TV game shows, worship events or large managed corporate events.

Product Highlights

  • Manage up to 2 incoming Skype calls to 2 SDI outputs
  • Two professional SD/HD SDI input/output
  • Supports both I/O for NDI™
  • Skype TX controller software with control console
  • Ultra low delay: For instantaneous bi-directional video/audio contributions
  • Video and audio free from adverts
  • Aspect ratio correction method: Scale your SDI input picture to your requested resolution
  • Customisable tally or information graphic overlay back to return caller
  • Screen sharing capability
  • Auto-Answer function
  • Embedded SDI audio
  • Remote Management Ethernet Port for bare metal restore
  • HD Recording Function
  • Free complimentary technical information via the Customer Portal
    I/O Interfaces
  • AES67 Enabled
See the product