Product Information
The TD-102D is a wireless microphone system utilizing UHF and Dante network transmission.
Similar Products
- Sonifex
Sonifex – AVN-AESIO8 8 AES3 Input, 8 AES3 Output Dante® Interface, PoE
The AVN-AESIO8 audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. A valid input signal is confirmed by front panel AES3 lock LEDs for each input. All outputs follow the Dante system sample rate.
This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All digital AES3 inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link and Clock.
- I/O Interfaces
- ESI
planet22c
planet 22c is an extremely compact interface box that provides 2 analog input and 2 analog output channels at pristine reference audio quality in a Dante IP audio network.
The lightweight and sturdy I/O solution is equipped with ultra high quality 24-bit / 96kHz analog-to-digital and digital-to-analog converters. Supporting balanced line audio signals with home (-10dBV) and professional (+4dBu) signal levels, it works as an ideal interface wherever high quality audio is needed within the Dante network.
This makes planet 22c ideal to interface any analog equipment such as a traditional mixer, studio monitors or PA speakers, synthesizers or other electronic instruments and much more with the Dante world. The linear frequency response and excellent audio quality even makes planet 22c ideal for audio measurement purposes.
One of the best features is that it can be powered not only via the included 12V DC power adapter but also directly from the Ethernet cable as a PoE (Power over Ethernet) device. This is perfect when using it in a remote location.
It can also be integrated into a modern music studio when using the optional Dante Virtual Soundcard (DVS)
- I/O Interfaces
- Lectrosonics
Lectrosonics – DNTWP
The DNTWP Dante™ Audio Interface is a cost effective multi IO wall box. The unDX2IO features two balanced mic/line XLR inputs and two balanced XLR line outputs. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. The unDX2IO’s size and IO density make it easy to put Dante connectivity wherever it’s needed near the audio source or sink thereby eliminating costly and interference prone analog wiring.
- I/O Interfaces