BARE – BR-103C/D


More details

Similar Products

vpage-vp4|vpage-vp4
  • Alcorn McBride

Alcorn McBride – V-Page VP4

V-Page provides facility-wide intelligent paging using Dante audio networks. The configuration of your paging network, such as Q-Sys, is completely programmable using the software in the DSP system. This includes zone assignments, button and light behaviors and zone priorities. Each V-Page station includes user-programmable illuminated buttons, microphone input, and level control. An expansion connector allows for an additional 16 illuminated pushbuttons. A single Ethernet cable carries audio, power, and control between the V-Page station and the equipment rack. A facility may incorporate an unlimited number of V-Page stations by simply connecting them to PoE enabled network switches. The VP4 is a four button station with a 5-pin XLR connector and mounting bracket for a push-to-talk microphone. It is intended for use with a coiled cord dynamic microphone (VP4Mic, sold separately).
    I/O Interfaces
RedNet5_front-600-update
  • Focusrite

Focusrite – RedNet 5

RedNet 5 connects your RedNet system to Pro Tools HD®. Up to six units can be connected to one Pro Tools HDX system, supporting up to 192 channels at 96 kHz or 96 channels at 192 kHz. Pro Tools HD® Native and Pro Tools HD® (TDM) are also supported. RedNet 5 is interoperable with other Pro Tools interfaces and no RedNet PCIe card is required.
    I/O Interfaces
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo 32.32M

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.32M provides 32x32 balanced analog audio inputs and outputs. The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.32M provides 32x32 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status. The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller. Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack. All units can also be operated in AES67 interoperability mode.
    I/O Interfaces
  • Dante Ch: 32x32
  • 16-bit, 24-bit, 32-bit