Cart
← Back to Product Catalog

AZMP8-D

I/O Interfaces

Learn more

Similar Products

ru-nfdp_400px
  • RDL

RDL – RU-NFDP

The RU-NFD is a high quality Dante network to Format-A interface/distributor compatible with RDL Format-A twisted pair audio products. The RU-NFD converts three Dante network audio channels to RDL Format-A. The unit also converts a fourth Dante audio channel to a balanced line-level AUX output. Model RU-NFDP operates from PoE. The RU-NFD is a high quality Dante network to Format-A interface/distributor compatible with RDL Format-A twisted pair audio products. The RU-NFD converts up to three Dante network audio channels to RDL Format-A. The unit also converts a fourth Dante audio channel to a balanced line-level AUX output. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products. The RU-NFD provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-NFD is also available in a PoE version (RU-NFDP). If PoE power and an external 24 Vdc supply are both feeding an RU-NFDP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product
attero-tech-unDX2IO|attero-tech-unDX2IO
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – unDX2IO+

The unDX2IO+ Dante™ Audio Interface is a cost effective multi‐IO wall box to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.. The unDX2IO features XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable. CONTROL - Audio flow assignment, input gain and phantom power are all controllable via the Dante network connection. The unDX2IO+ replaces the legacy unDX2IO.
    I/O Interfaces
  • Dante Ch: 4x4
  • 44.1kHz-48kHz
See the product
PIC_CDT100_MK3_002
  • Clockaudio

Clockaudio – CDT 100 MK3

The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transmission across a standard IP network. Based on high performance and pre-configurable hardware platform it guarantees perfect sound quality. The CDT 100 Mk3 has a variety of uses including but not limited to boardrooms, video and conference rooms, or any place else where multiple microphones and control devices are connected back to the AV equipment cabinet.

Features:

• Easy to install with under table mounting

• Dante Audio and control signals transported over standard IP network

• 4 audio inputs, with gain control, high pass filters and Phantom Power

• 2 line-level outputs with high pass filters

• Up to 6 units may be daisy chained

• 4 Touch Switch ports compatible with all logic enabled Clockaudio devices.

• Open API for interfacing with Control Systems

• Compatible with any Dante capable audio DSP

    I/O Interfaces
See the product