Auvitran – AVDT-BOB-ADE8IO


More details

Similar Products

  • Blustream

Blustream – DA22XLR-WP-US

The DA22XLR-WP is a multi-input / output wall plate to convert analog audio within a digital Dante® networked audio system. The DA22XLR-WP converts 2 input channels of balanced / unbalanced / MIC audio with switchable 48v Phantom power to Dante® digital audio, and 2 channels of Dante® audio to 2 output channels of balanced / unbalanced audio. The DA22XLR-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport and magnetic faceplate design allows installation into most double-gang US junction boxes.
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
0024761_4-x-4-analogdante-io-module_500
  • AtlasIED

AtlasIED – IED1544AIO-D

TheAtlasIED1544AIO-D is a 4-input (2 flow) x 4-output (2 flow) mic / line level analog pre-amplifier that converts analog audio signals to Dante® network

audio. Multiple channels of Dante® network audio can be transported over standard IP networks. TheAtlasIED1544AIO-D 4x4 Dante® I/O Module features four analog balanced mic or line inputs (selectable) and four balanced line outputs. The four analog inputs are converted into Dante® network audio and can be routed via Dante Controller™. The four outputs convert Dante® digital audio received over the LAN into analog audio. There are indicators for network connection, network audio traffic, and power. Each input can be selected to Line or Mic level. In Mic mode, each input has 3 gain selections with Phantom Power. TheAtlasIED1544AIO-D requires no external power supply. It is powered via a network PoE port or a PoE injector.

    I/O Interfaces
  • Dante Ch: 4x4
alcorn-mcbride-VP4X
  • Alcorn McBride

Alcorn McBride – V-Page VP4X

The VP4X station is an off-the-shelf 4-zone paging station that’s designed to fit in a standard 4-gang box.  A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located.  It even supports SFP network modules for application that require a long run back to the equipment room Alcorn McBride believe that paging solutions should be a breeze to install and intuitive to operate.  That’s why they designed the V-Page family of products to leverage the flexibility of industry-standard DSP platforms like Q-SYS and provide a simple button-based UI that just makes sense. The VP4X station is an off-the-shelf 4-zone paging station that’s designed to fit in a standard 4-gang box.  A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located.  It even supports SFP network modules for application that require a long run back to the equipment room
    I/O Interfaces