Cart
← Back to Product Catalog

Sound Devices – A10-RACK

I/O Interfaces

More details

Similar Products

musicrown-DF1208MN_1200px|musicrown-DF1208MN_1200px
  • Musicrown

Musicrown – DF1208MN

32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.14x12 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel. 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.14x12 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel. Fully supports scalable DANTE digital network audio card and AEC automatic echo noise cancellation card, the users can freely configure and choose according to their requirements. Dante digital network audio card configuration is a double standard network interface, which fully supports the function of unite switching and hot backup, hardware system can distinguish automatically, can use immediately when it inserts. Software internal and local analog signal can realize fully sound mixing matrix processing. Each channel has independent DSP processing function.
    I/O Interfaces
See the product
clockaudio-cdt-100_600px
  • Clockaudio

Clockaudio – CDT 100

The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transport using network based Dante protocol. By taking advantage of the advanced Dante technology and based on the high performance and pre-configurable hardware platform, this product transfers audio and control signals via widely used Ethernet and is able to guarantee perfect sound quality. The CDT 100 has a variety of uses including but not limited to boardrooms, conference rooms, video conference rooms and any place else where multiple table microphones and control devices are connected back to the AV equipment cabinet. Features
  • Easy to install with under table mounting
  • Audio and control signals transported over Dante
  • 4 audio inputs, multiple units may be daisy chained (maximum of 6 units on a single CAT-5)
  • Provides Phantom Power for each mic input
  • 4 control inputs compatible with all Clockaudio devices including:
    • direct connection to CH32 LItetouch switch & LED, TS001, Retracta CRM202S-RF, CS-S Series, SM80S, S80S
    • direct connection to ARM-C controller
  • Open API for interfacing with Control Systems
  • Compatible with any Dante capable audio DSP
    I/O Interfaces
  • Dante Ch: 2x4
  • 24-bit
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 0.32L

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.32L provides 32 balanced outputs. The output levels are configurable up to +24dBu. With terminal block termination.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 32x0
  • 16-bit, 24-bit, 32-bit
See the product