Cart
← Back to Product Catalog

AU-X2OPRO-DA

I/O Interfaces

More Details

Similar Products

Dante官网logo
  • BARE

BARE – DE-8

Features： 1. The audio signal and power transmission of the speaker are realized through the same network cable. 2. The RJ45 interface on the back panel of the box is equipped with XLR firmware, which can be used for waterproofing and strengthen the connection between the box and the wire. 3. The network cable realizes signal transmission and power supply; 4. The IP address is automatically assigned through the router DHCP; 5. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 1. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 7. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 8. It has complete protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 9. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
See the product
  • miniDSP

Flex 8N

The Flex EIGHT-N joins the miniDSP Flex family as a Dante‑capable audio processor that natively streams Dante/AES67 audio. It delivers eight Dante/AES67 AoIP channels plus four analog outputs for seamless, low‑latency multi-channel distribution within any Dante ecosystem.

Featuring multiple digital inputs, eight digital outputs and four analog outputs, the Flex EIGHT-N can drive active speakers up or be set up as a multi-zone processor via our flexible routing. Every output has miniDSP’s full processing suite: parametric EQ, IIR and FIR filters, configurable crossovers, advanced biquad programming and precise delay.

Digital inputs include USB, S/PDIF (RCA and optical) and Bluetooth (LDAC/aptX). An OLED front panel and encoder/volume knob provide local control, and firmware supports upgrades such as Dirac Live room correction.

In short, the Flex 8N is a compact, Dante‑ready powerhouse for modern active speaker and subwoofer systems, offering direct network streaming and sophisticated loudspeaker processing.

    I/O Interfaces
See the product
dd-btn44
  • RDL

RDL – DD-BTN44

The D SERIES-BTN44 modules are Dante networked, wall-mounted audio interfaces that include bidirectional Bluetooth audio, unbalanced analog stereo or mono audio inputs and outputs, and a balanced or unbalanced line-level output. Stereo audio from a compatible Bluetooth-enabled device feeds two Dante network audio channels. Stereo audio connected to a front-panel Mini-Jack or L and R RCA jacks feeds two other Dante network audio channels.

Stereo audio is available to users through a front-panel Mini-Jack fed from two Dante network channels. A rear-panel terminal block provides either a balanced (+4 dBu) or unbalanced (-10 dBV) output from one Dante network channel. That output may feed a variety of RDL wall panels to provide a specific mic or line level output to users, or it may be used to feed the audio power amplifier in the associated audio zone. One Dante channel may be routed back to a connected device through the Bluetooth interface enabling full duplex communication.

The D SERIES-BTN44 modules are powered from PoE. The installer can customize the module name and programming password through the Bluetooth connection using a smartphone, computer or tablet terminal program. These modules feature studio-quality circuits and analog filters to provide audio performance exceeding expectations from consumer interface technologies. High performance, simplicity of operation and efficiency of installation make RDL the best value in professional Bluetooth interfaces.

    I/O Interfaces
See the product