Cart
← Back to Product Catalog

Attero Tech by Q-SYS – Axon DTH1620

Amplifiers

More details

Similar Products
  • Blustream

Blustream – NPA70DA

Our NPA70DA networked audio zone amplifier delivers advanced audio integration within a commercial or residential AV installation. The NPA70DA features a 2 x 35W digital amplifier (1 x 70W mono) or 70V / 100V hi-level constant voltage output and Dante® audio integration. The NPA70DA can be powered via PoE++ from a compatible network switch, or locally should the switch not support PoE++. The unit also includes the ability to lower the amplifier power output subject to PoE capabilities, support for combined or independent LAN and Dante® connections, DSP with a 31 band EQ, audio delay for lip sync correction, and control via front panel, IR, RS-232, TCP/IP, web-GUI or 12V trigger.
    Amplifiers
  • Dante Ch: 2x0
  • AES67 Enabled
See the product
CgAH6F_pWhOAdSKGAAC310gLzwI133
  • Soundking

Soundking – AKD1300

AK series Dante network amplifier, with analog /digital automatic backup switching function, the analog signal will switch automatically when there is a problem with the digital signal, ensuring that the signal is not terminated due to device failure. The product is divided into two channel and four channel two specifications, using Dante, AES digital audio input, 10 channel signal input can be matrix selection and mutual thermal backup, intelligent network monitoring, and center control. PFC switch power supply, high performance DSP sound control with FIR balance, AGC automatic overload protection, square wave self-load impedance suppression. Intelligent temperature control with overheat protection, constant resistance and constant pressure.

※Optional functions: remote switch, center control shutdown, remote maintenance, sound channel backup, speaker intelligent control and others.

Applications: Acoustic systems in large government projects, large stadiums, cultural centers, etc.

    Amplifiers
See the product
ied-1542NA-D_600px_0|ied-1542NA-D_600px_0
  • AtlasIED

AtlasIED – IED1542NA-D

This product has reached "end-of-life" and is discontinued by the manufacturer The 1542NA-D is a compact power amplifier module capable of driving small loudspeaker loads in a GLOBALCOM® system.The 1542NA-D provides two outputs, each with 4 watts of power into an 8Ω load. This makes the module ideal for powering small zones that are made up of only a few low-powered loudspeakers.The audio inputs to the module are through the Ethernet audio network and are configured from the GLOBALCOM® System Management Center. The 1542NA-D model allows the use of Dante™ audio networking protocols.The 1542NA-D is powered using standard PoE and draw a maximum power of 13 watts. If PoE equipment is not used, an input is provided for an external +48VDC power supply. A green power indicator LED is included to show that the unit is powered on. Each channel has a green LED indicator that illuminates when signal is present and a yellow LED to indicate clipping. Another yellow LED illuminates to indicate that the device is in thermal overload. When this condition occurs, the device will stop passing signal until the condition has cleared.The amplifier is provided in an enclosure that either mounts to a DIN rail or is screwed down on a panel or wall to allow for convenient installation in remote closets close to the loudspeaker zone.Features
  • Available in single-channel or two-channel configurations
  • Available with Dante™ audio network interface
  • Control and configure using a web browser and GLOBALCOM® System Management Center
  • Settings storage in non-volatile memory
  • Full integration with theAtlasIED GLOBALCOM® vACS
  • Utilizes IEEE 802.af Power over Ethernet (PoE)
  • Removable connectors for easy installation
  • Rugged DIN-rail or panel/wall mount enclosure
    Amplifiers
See the product