Cart
← Back to Product Catalog

AtlasIED – BB-816DT

DSPs (Digital Signal Processors)

More details

Similar Products
  • Nexo

DME10

Built on the tried and tested Yamaha DME platform, the NEXO DME10 goes a step further than any other immersive processor by unlocking its raw processing power to users and allowing near limitless customisation. A 256 x 256 channel open architecture processor , DME10 ships with 32 object inputs / 16 speaker outputs included as standard, expandable in blocks of 32 x 16, 64 x 32 and 128 x 64 via a flexible licensing structure. Need the full channel count for a show today but two completely independent 64 channel immersive processors tomorrow? You can do that . With superior musical expression and sound field design, DME10 features 96kHz processing and is equipped with a wide range of DSP components that can be freely selected, connected, and configured, allowing for flexible system construction. And such is the processing power of the DME10, separate speaker system and immersive processors are no longer required. It’s all inside DME10.
    DSPs (Digital Signal Processors)
  • Dante Ch: 256x256
  • 24-bit, 32-bit
See the product
BLU-326-Reflection
  • BSS

BSS – BLU-326DA

Formerly known as BLU-326 The Soundweb London BLU-326DA offers configurable I/O, Dante / AES67 audio, and a high bandwidth, fault tolerant digital audio bus. The BLU-326DA is configurable through HiQnet™ London Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. This processor features Dante / AES67 audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port. As well, the processor includes support for Dante 4.0 firmware for integration with Dante Domain Manager. The BLU-326DA also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km. Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations. Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets) Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect. 12 Control Inputs and 6 Logic Outputs allow the BLU-326DA to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect. The BLU-326DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
    DSPs (Digital Signal Processors)
  • Dante Ch: 64x64
  • 24-bit
See the product
nexgentec-product-mage-ngtc-0404NX
  • nexgentec

nexgentec – NGTC-0404NX

The NGTC-0404NX is a DanteTM enabled digital signal processor for the nexgentecTM audio distribution solution

KEY FEATURES

• configurable signal processing
• rich palette of processing and logic objects, nexgentec super modules
• DanteTM audio, 64 x 64 audio, 4 x 4 analog input / output
• slot for option card

    DSPs (Digital Signal Processors)
  • Dante Ch: 64x64
See the product